User's Manual

Lens selection

(1) The proper lens is vital for obtaining full performance from the camera. The exit pupil distance is

particularly important for a 3 CCD type camera. If too short, vertical color shading can appear in the

picture.

(2) As the lens iris approaches fully open, problems such as loss of resolution, shading and flare (overall

image "white-out") can detract from picture quality.

(3) Image ghosting can occur if the lens is not matched to the CCD. Choose 1/2-inch for the HV-D27A

and 1/3-inch for HV-D37A.

(4) The camera dose not include flangeback adjustment. Depending on the type, focus might be

imperfect at the telephoto and wide angle extremes of a zoom lens.

Flange surface of lens

3.8mm or less (HV-D27A)

4.3mm or less (HV-D37A)

CAUTION:

Observe the dimensions of the lens

mounting selection as illustrated at

the right.

If the dimensions are not observed,

do not use such a lens, because the

lens and the camera will be damaged