User's Manual

RC-Z3 Remote Control Panel

All camera menu items can be operated remotely by connecting the RC-Z3 Remote Control Panel. Connect

the panel as follows.

(1) Set camera internal switch SW806 to RC-Z3.

See internal switch selection on page 58.

(2) Open the SPECIAL SET menu and set the camera communications rate to 9600 bps (see page 38, factory

setting).

Operation

(1) Direct control

The following items can be controlled directly as well as from the control panel.

・BAR/CAM ・ENABLE(ON/OFF) ・M.BLK

・WHITE BAL ・R GAIN ・A.WHT

・GAIN ・B GAIN ・A.BLK

・DTL ・R BLK ・SCENTE FILE

・IRIS MODE ・B BLK

・SHUTTE(ON/OFF)

・CONTRST(ON/OFF)

(2) MENU controls

All control items are set from menu. Press the FUNCTION button of the remote control panel to produce

the menu mode and display the MAIN MENU screen. Again press the FUNCTION button to extinguish

the menu screen and return to the direct mode.

Operate the menu with the UP, DOWN, LEFT and RIGHT buttons.

Note: While pressing the UP button presses the FUNCTION button for 2 seconds to produce the special set

mode. The SPECIAL SET menu appears.