User's Manual

Input/Output Signals

1. Input signal

(1) Genlock input

･

VBS 1.0 Vp-p +/- 3 dB or black burst, 75 ohm or high impedance (BNC)

(Sync 0.3 +/- 0.1 Vp-p, burst 0.3 +/- 0.1 Vp-p)

･

HD/VD TTL level (TRIG connector)

(2) Serial data (4 pin connector)

･

1.5 Vp-p +/- 3 dB, high impedance (in connection with RC-Z3)

･

RS-232C level (in connection with personal computer)

Note: Set internal switch according to connected equipment.

(3) Trigger input TTL level(L:0 to 0.4 VDC H:3.4 to 5.0 VDC)

2. Output signal ratings

(1) Composite video (BNC, D-sub connector)

VBS 1.0 Vp-p/ 75 ohm

(2) Y/C (D-sub, Y/C connectors)

Y : 1.0 Vp-p/ 75 ohm

C : 0.28 Vp-p (burst)/ 75 ohm (NTSC),

0.3 Vp-p (burst)/ 75 ohm (PAL)

(3) Component (D-sub connector)

Y : 1.0 Vp-p/ 75 ohm

R-Y: 0.7 Vp-p/ 75 ohm

B-Y: 0.7 Vp-p/ 75 ohm