Datasheet

7K500 OEM Specification
Page 97 of 176
Word Content Description
89 xxxxH Time required for security erase unit completion
Time= value(xxxxh)*2 [minutes]
90 xxxxH Time required for Enhanced security erase completion
Time= value(xxxxh)*2 [minutes]
91 40xxH Current Advanced Power Management level
15- 8 (=40h) Reserved
7- 0 (=xxh) Currect Advanced Power Management level set by Set
Features Command (01h to FEh)
92 xxxxH Current Master Password Revision Codes
93 0000H Reserved
94 80xxH Automatic Acoustic Management value
15-8 Vendor’s Recommended Acoustic Management level
7-0 Current Automatic Acoustic Management value
Default value is FEh
95 0000H Stream Minimum Request Size
96 0000H Streaming Transfer Time – DMA
97 0000H Streaming Access Latency – DMA and PIO
98-99 0000H Streaming Performance Granularity
100-103 Note.2 Maximum user LBA address for 48-bit Address feature set
104 0000H Streaming Transfer Time - PIO
105-106 0000H Reserved
107 8848H Inter seek delay time (1.5tt + 2.5tl)
108-111 XXXX World Wide Name
112-118 0000H Reserved
119 401CH Supported Setting
15 (=0) Always
14 (=1) Always
13-6 (=0) Reserved
5 (=0) 1=Free-fall Control feature set is supported
4 (=1) 1=Download Microcode with mode 3 is supported
3 (=0) 1=Read and Write DMA Ext GPL is supported
2 (=1) 1=WRITE UNCORRECTABLE is supported
1 (=0) 1=Write Read Verify feature set is supported
0 (=0) Reserved
120 401CH Enabled Setting
15 (=0) Always
14 (=1) Always
13-6 (=0) Reserved
5 (=0) 1=Free-fall Control feature set is enabled
4 (=1) 1=Download Microcode with mode 3 is supported
3 (=0) 1=Read and Write DMA Ext GPL is supported
2 (=1) 1=WRITE UNCORRECTABLE is supported
1 (=0) 1=Write Read Verify feature set is enabled
0 (=0) Reserved
121-126 0000H Reserved
127 0000H Removable Media Status Notification feature set
Note.1 The ‘*’ mark in ‘Content’ field indicates the use of those parameters that are vendor specific.
Table 62 Identify device information --- Continued ---