22" LCD Colour Television with integral DVD player Télévision Couleur LCD avec lecteur DVD integral L22DP03E A 2 䄰〭䍏噅刭䡉呁䍈䤭⡌㌲䡐〳䔩ⵍ䈳㔭偁久唭〶㈲㜷張〱㐷㈸ ㄳ⁔敭浵稠㈰〹⁐慺慲瑥獩‱㜺㈳㨵 Instructions for use Notice d'utilisation GB F
Contents Features ................................................................. 3 Accessories ............................................................ 3 Introduction ............................................................. 4 Preparation ............................................................. 4 Safety Precautions ................................................. 4 Power Source ..................................................... 5 Power Cord ...............................................
Noise Reduction ........................................... 32 Film Mode ..................................................... 32 Game Mode .................................................. 32 Picture Zoom ................................................ 32 Reset ............................................................ 32 Store ............................................................. 32 Sound Menu ..................................................... 33 Volume .....................................
Features Accessories • Remote controlled colour LCD TV. INFO • Fully integrated digital TV (DVB-T). • HDMI connector for digital video and audio. This connection is also designed to accept high definition signals. • USB input. SLEEP SCREEN RETURN SOURCE PRESETS MENU • 200 programmes from VHF, UHF. • OSD menu system. • Scart socket for external devices (such as video, video games, audio set, etc.). • Stereo sound system. (German+Nicam) • Teletext, fastext, TOP text. FAV LANG.
Introduction Thank you for choosing this product. This manual will guide you for the proper operation of your TV. Before operating the TV, please read this manual thoroughly. Please do keep this manual in a safe place for future references. DO be careful with glass panels or doors on equipment. DO route the mains lead so that it is not likely to be walked on, crushed, chafed, or subjected to excessive wear and tear or heat.
normally, or if it is damaged in any way - switch off, withdraw the mains plug and consult your dealer. ABOVE ALL --- NEVER let anyone especially children push anything into holes, slots or any other opening in the case - this could result in a fatal electrical shock; --- NEVER guess or take chances with electrical equipment of any kind --- it is better to be safe than sorry! ************* Power Source The TV set should be operated only from a 220240 V AC, 50 Hz outlet.
materials, such as foil bag, must be kept away from children. • Batteries, including those which are heavy metal-free, should not be disposed of with household waste. Please dispose of used battery in an environment friendly manner. Find out about the legal regulations which apply in your area. • Cold cathode fluorescent lamp in LCD PANEL contains a small amount of mercury; please follow the local laws or regulations for disposal.
Overview of the Remote Control 1. Standby 2. Image size INFO 3. Sleep timer 4. Numeric buttons SLEEP 5. Return / TXT Index SCREEN SOURCE PRESETS 6. Cursor up / TXT up page 7. Cursor left / TXT sub page 8. Programme up 9. Programme down 10. Mono-Stereo / Dual I-II 11. Swap RETURN 12. Electronic programme guide (in DTV mode) MENU 13. Info / TXT reveal 14. Picture mode selection 15. Source selection 16. Red / Sound / Page up (in DTV mode) 17. Green / Picture / Page down (in DTV mode) 18.
LCD TV and Operating Buttons FRONT VIEW 1. Standby button 2. TV/AV button 3. Programme Up/ Down buttons 4. Volume Up/Down buttons P\CH TV/AV MENU 5. Switch is used for turning the TV on or off. Note: Press “ ” / “ ” buttons at the same time to view main menu. REAR VIEW English - 8 MB25 [GB] (01-TV)_22856W_1900UK_IDTV_NICKEL5_rocker_10063498_50150822.indd 8 25.06.
Viewing the Connections- Back Connectors 1. SCART socket inputs or outputs for external devices. Connect the SCART cable between SCART socket on TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player). Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode. Note: You should connect the decoder to EXT-1, if you are planning to watch a scrambled channel.
5. RF Input connects to an antenna or a cable. Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an appropriate antenna cable, as shown in the illustrationin the following pages. 6. Audio Line Outs output audio signals to an external device such as an optional sound system. You can use SPDIF instead. 7. PC Input is for connecting a personal computer to the TV set.
Viewing the Connections - Side Connectors 1. CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you subscribe to. For more information, see “Common Interface” section. 2. Headphone jack is used for connecting an external headphone to the system. Connect to the HEADPHONE jack to listen to the TV from headphones. 3. Video Input is used for connecting video signals of external devices.
Power Connection IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz. • After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. • Plug the power cable to the mains socket outlet. Aerial Connection • Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV. REAR VIEW English - 12 MB25 [GB] (01-TV)_22856W_1900UK_IDTV_NICKEL5_rocker_10063498_50150822.indd 12 25.06.
Connecting the LCD TV to a PC For displaying your computer’s screen image on your LCD TV, you can connect your computer to the TV set. • Power off both computer and display before making any connections. • Use 15-pin D-sub display cable to connect a PC to the LCD TV. • When the connection is made, switch to PC source. See “Input selection” section. • Set the resolution that suits your viewing requirements. Resolution information can be found in the appendix parts.
Connecting to a DVD Player If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections. Note: Cables shown in the illustration are not supplied. • If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD player as illustrated below, switch to HDMI source.
Using Side AV Connectors You can connect a range of optional equipment to your LCD TV. Possible connections are shown below. Note that cables shown in the illustration are not supplied. • For connecting a camcorder, connect to the VIDEO IN socket and the AUDIO SOCKETS. For selecting the related source, see the section “Input selection” in the following parts. • To listen the TV sound from headphones, connect to the HEADPHONE jack of theTV.
Using Other Connectors You can connect a range of optional equipment to your LCD TV. Possible connections are shown below. Note that cables shown in the illustration are not supplied. • For connecting a to a device that has SPDIF support, use an appropriate SPDIF cable to enable sound connection. • To connect external speakers; connect the audio output sockets on the TV to an external amplifier that is connected to a speaker system.
Connecting Other Equipment via Scart Most devices support SCART connection. You can connect a; DVD recorder, a VCR or a decoder to your LCD TV by using the SCART socket. Note that cables shown in the illustration are not supplied. Power off both the TV and the devices before making any connections. For more information, refer to your device’s own instruction book.
Inserting Batteries in the Remote Control Handset Switching the TV On/Off To Switch the TV On • Remove the battery cover located on the back of the handset by gently pulling backwards from the indicated part. • Insert two AAA/R3 or equivalent type batteries inside. Place the batteries in the right directions and replace the battery cover. • Connect the power cord to the 220-240V AC 50 Hz. ” button to position “|” so the TV • Switch the “ will switch to standby mode. Then the standby LED lights up.
Input Selection Once you have connected external systems to your TV, you can switch to different input sources. • Press SOURCE button on your remote control for directly changing sources. or, • Select “Source” option from the main menu by using “ ” or “ ” button. Use then “ ” or “ ” button to highlight an input and press “ ” button to select. Note : You can mark desired source options by pressing the OK button.
Initial Settings When the TV set is operated for the first time, the IDTV turns on first. Because this is the first time the TV is used, there are no channels stored in the memory. The IDTV will automatically tune to the UHF or VHF(*) (* for EU countries) transmission channels, searching for digital terrestrial TV broadcasts and displaying the names of channels found. This process will take about a few minutes.
General Operation Press the SOURCE button on the remote control and select DTV/USB to switch the TV set to digital terrestrial television broadcasting. Information Banner • Whenever you change channel, using the P- / P+ button or the numeric buttons, the TV displays the broadcast picture along with an information banner at the bottom of the screen (available only in DTV mode). This will remain on the screen for a few seconds.
• Press “0” button on the remote control to view Guide Search menu. Using this feature, you can search the programme guide database in accordance with the genre selected or with name match. Info available in the programme guide will be searched and results matching your criteria will be listed. You can select programmes or set timers by highlighting a channel and then pressing OK button. Note: Searching process can be performed by the desired date rate or by the channel basis.
IDTV Menu System The IDTV menu can only be viewed when watching digital terrestrial broadcasting. Use the SOURCE button to select DTV mode. Press the “MENU” button. The menu below appears on the screen: while the “Select” item on Channel List menu is highlighted by using “ ” or “ ” button. Then the name and number of the selected channel will be displayed in the top-left and top-right of the channel display at the top-right of the screen, respectively.
Press the “MENU” button to cancel the editing or OK button to save the new name. Adding Locks to Channels Channel locking provides a password-protected access to channels selected by parents. In order to lock a channel you should know the parental lock password (default value is set to 0000 in the factory and can only be changed from the Configuration menu). • Press the OK button to delete the highlighted channel in the channel list.
How to Add a Channel to a Favourites List • By pressing “ ” or “ ” buttons, highlight the channel that you want to add to the favourite list. To display timers window, activate the item from the main menu. To add a timer, press the YELLOW button on the remote control. Then “Add Timer” window appears. • By pressing OK button, the highlighted channel is added to the Favourite List. Channel: “ ” or “ ” keys will navigate the user through the TV or Radio list.
• Insert the CAM and then the viewing card to the slot that is located in the terminal cover at the left-hand side of the TV (from front view). Setup The adjustments in this menu are given as the following: • The CAM should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted. • Connect the TV to the mains supply, switch on and then wait for few moments until the card is activated.
channels. If you select “Radio Only”, with the “ ” or “ ” buttons, you navigate through only radio channels. If you select “Text Only”, with the “ ” or “ ” buttons, you navigate through only text channels. Active Antenna Use “ ” or “ ” buttons to highlight Active Antenna option. • Press “MENU” button and using the “ ” or “ ” buttons to choose Setup and press the OK button. • Highlight Configuration menu with “ ” or “ ” keys and press OK.
Menu Lock In menu lock you can set locking for all menus, or the Installation Menu to restrict access to these menus. If the menu lock is disabled, there will be free access to the menu system. Use “ ” or “ ” buttons to go to Menu Lock option. Use “ ” or “ ” buttons to choose Menu Lock Mode. DISABLED : All menus are unlocked. ALL MENUS : All Menus are accessible only with the correct lock key. So the user cannot add, delete, rename, channels, cannot set timers.
Language Language Settings In this menu the user can adjust the preferred language. Language is changed by pressing OK button. In the configuration menu, highlight the Language Settings item by pressing “ ” or “ ” buttons. Press OK and Language Settings submenu will be displayed on the screen: Use “ ” or “ ” buttons to highlight the menu item that will be adjusted and then press “ ” or “ ” button to set. Notes: • System Language determines the on-screen menu language.
Automatic Channel Scan Automatic channel scan is started by pressing OK button while Automatic channel scan item is highlighted. The following message appears on the screen: After APS is finalized, the programme table will appear on the screen. In the programme table you will see the programme numbers and names assigned to the programmes. If you do not accept the locations and/or the programme names, you can change them via the program table.
By selecting Yes and pressing the OK button, the existing channel table will be deleted. After factory settings are loaded, “First Time Installation” menu will be displayed. The menu which is displayed for language selection appears on the screen at first. By using “ ” or “ ” buttons, select the desired language option, and press OK button to activate. After then, “First time installation” OSD will appear on the screen.
Analogue TV Menu System Picture Menu Film Mode Films are recorded at a different number of frames per second to normal television programmes. Press “ ” or “ ” button to select Film Mode. Press “ ” or “ ” button to set this feature On or Off. Turn this feature on when you are watching. films to see the fast motion scenes clearly. Game Mode Select Game Mode by pressing “ ” or “ ” button. Use “ ” or “ ” button to set Game Mode as On or Off.
Sound Menu Balance This setting is used for emphasizing left or right speaker balance. Press “ ” or “ ” button to select Balance. Press “ ” or “ ” button to change the level of the balance. Balance level can be adjusted between -32 and + 32. Headphone Press “ ” or “ ” button to select Headphone. Press “ ” button to view the headphone menu. Note: Headphone will be disabled when SPDIF option is set to on. Headphone sub-menu options are described below: Volume Press “ ” or “ ” button to select Volume.
Press “ ” or “ ” button to select Effect. Press “ ” or “ ” button to set as On or Off . Store Press “ ” or “ ” button to select Store. Press “ ” or OK button to store the settings. “Stored...” will be displayed on the screen. Feature Menu setting to adopt. Press “ ” or “ ” button to select Default Zoom. You can set Default Zoom to Panoramic, 16:9, 4:3 or 14:9 by pressing “ ” or “ ” button. Blue Background If the signal is weak or absent, the TV will automatically change to a blue screen.
Install Menu Install Menu in AV Modes The following screen appears in the install menu when the TV is in AV modes. Note that limited options will be available. Switch to TV mode for viewing complete version of the Install menu. Program Press “ ” or “ ” button to select Program. Use “ ” or “ ” button to select the program number. You can also enter a number using the numeric buttons on the remote control. There are 200 programme storage between 0 and 199. Colour System Band can be selected either C or S.
cursor action, programme selection is done automatically. Name To change the name of a programme, select the programme and press the RED button. The first letter of the selected name will be highlighted. Press “ ” or “ ” button to change that letter and “ ” or “ ” button to select the other letters. By pressing the RED button, you can store the name. Whenever you press the BLUE button, APS function stops and Program Table appears on the screen.
PC Mode Menu System See “Connecting the LCD TV to a PC” section for connecting a PC to the TV set. For switching to PC source, press “SOURCE” button on your remote control and select PC input. You can also use “Source” menu to switch to PC mode. Note that PC mode menu settings are available only while the TV is in PC source. PC Position Menu Select the first icon by pressing “ ” or “ ” button. PC Position menu appears on the screen: Select V Position item by using “ ” or “ ” button.
Displaying TV Information Programme Number , Programme Name , Sound Indicator and Zoom Mode information is displayed on the screen when a new programme is entered or “ ” button is pressed. Mute Function Press “ ” button to disable sound. Mute indicator will be displayed in the upper side of the screen. To cancel mute, there are two alternatives; the first one is pressing the “ ” button and the second one is increasing the volume level.
Tips Screen Care Subtitle This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen. Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the coating layer of the TV screen. For your safety, unplug the mains plug when cleaning the set. When moving the TV, hold it properly from the bottom part. Image Persistence Teletext Teletext system transmits information such as news, sports and weather on your TV.
Sound You can not hear any sound. Did you perhaps interrupt the sound, pressing the button? Sound is coming from only one of the speakers. Is the balance set to one extreme? See Sound Menu. Remote Control Your TV no longer responds to the remote control. Perhaps the batteries are exhausted. If so you can still use the local buttons at the bottom of the TV. Input Sources If you cannot select an input source, it is possible that no device is connected.
Appendix A: PC Input Typical Display Modes The display has a maximum resolution of 1920 x 1200. The following table is an illustration of some of the typical video display modes. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen. Resolution Frequency Hor Ver Ver (Hz) Hor (KHz) Standard Supported Zoom Modes 1 640 480 60 31.5 VESA 16:9, 4:3 2 640 480 72 37.
EXT-1 (SCART) FAV YPbPr HDMI1 Supported Signals Available PAL 50/60 O NTSC 60 O RGB 50 O RGB 60 O PAL 50/60 O NTSC 60 O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1080I 60Hz O 1080P 24Hz O 1080P 50Hz O 1080P 60Hz O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1080I 60Hz O 1080P 50Hz O 1080P 60Hz O 1080P 24 HZ O (X: Not Available, O: Available)
Appendix C: Pin Specifications SCART connector pin specifications Pin Input signal Pin 1 AUDIO OUT (RIGHT) 12 Input signal Not used 2 AUDIO IN (RIGHT) 13 RGB-R GND 3 AUDIO OUT (LEFT/MONO) 14 GND 4 AUDIO GND 15 RGB-R / S.VHS CHROMINANCE IN 5 RGB-B GND 16 BLANKING SIGNAL 6 AUDIO IN (LEFT/MONO) 17 COMPOSITE VIDEO GND 7 RGB-B IN 18 BLANKING SIGNAL GND 8 AUDIO / RGB SWITCH / 16:9 19 COMPOSITE VIDEO OUT 9 RGB-G GND 20 COMPOSITE VIDEO / S.
Specifications TV BROADCASTING PAL/SECAM B/G D/K K’ I/I’ L/L’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profile 1 Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profile for UK Frequency range: 474-850 MHz for UK models Digital Reception 170-862 MHz for EU models Transmission standard: DVB-T. MPEG-2 Demodulation: COFDM with 2K/8K FFT mode FEC: all DVB modes Video: MP@ML, PAL, 4:3/16:9 Audio: MPEG Layer I&II 32/44.
Contents Features ............................................................... 46 General Properties............................................ 46 About this Manual ............................................. 46 Safety Information ......................................... 46 Notes on Discs ..................................................... 47 On handling discs ............................................. 47 On cleaning.......................................................
Features General Properties • DVD / CD / CD-R / CD-RW / MP3 / JPEG / MPEG. • USB & MC inputs. • NTSC/PAL playback (according to disc content) • User-friendly multilanguage OSD menu control. • , LPCM audio via coaxial and optical digital audio outputs. (optional) • Multiple Aspect Ratio support (16:9 Widescreen, 4:3 Letterbox, 4:3 PAN & SCAN) *** DVD-R/RW discs recorded by DVD-Video method can be played . Some DVD-R/RW discs may be incompatible due to laser pickup and disc design.
Notes on Discs How to Watch a DVD On handling discs • To keep the disc clean, handle the disc by its edge. Do not touch the surface. When placing a disc into the loader, labeled side of the disc should be on the front: • Do not stick paper or tape on the disc. • If the disc is contaminated with any substance like glue remove before using it.
Using Digital Multimedia Connectors • Use SWAP button on the remote control to switch between USB and memory card. • You can connect USB/MC devices to your TV by using USB or MC input of the TV. This feature allows you to display/play files stored on a USB device or a MC card. • It is possible that certain types of USB devices (MP3 Players) or Multimedia Card interfaces may not be compatible with this TV.
Overview of the Remote Control 1. Standby 2. Image size 3. Sleep timer INFO 4. Numeric buttons 5. Return SLEEP SCREEN SOURCE PRESETS 6. Cursor up 7. Cursor left 8. Programme up 9. Programme down 10. No function in DVD mode 11. Audio-Language selection 12. Swap / DVD media selection RETURN MENU 13. No function in DVD mode 14. Display time / DVD menu 15. Clear 16. Stop 17. No function 18. Rapid Reverse 19. Rapid advance 20. Info 21. No function 22. Picture mode selection 23.
/ USB & MC Modes Playback >Highlight an item by moving up or down. Switch to DVD source by using the SOURCE or PLAY button on the remote control. You can connect both USB and MC sources to your TV at the same time. Press SWAP button on the remote control to list, available inputs are listed on a menu screen. DVD > Play > Pause > Stop RETURN / USB MEDIA > Rapid reverse / rapid advance/ . CARD SEARCH Select the desired input by using the cursor button and then press OK button to view contents.
Stopping Play The screen freezes. Press stop ( ) twice (only for videos). Press SKIP/ FRAME ( control. To stop the play permanently, press STOP ( ) twice. When the STOP( ) button is pressed for the first time, a message “PRESS PLAY KEY TO CONTINUE” will appear on the screen to remind you if you want to continue the play. To stop the play, press the STOP ( ) button again or you can press SELECT to continue. ) on the remote The next frame of the movie is displayed.
title, the search box disappears and “ Input Invalid” message is displayed on screen. • If you wait five seconds without pressing any key to enter time, selecting scenes by time option is cancelled. • If you wait five seconds without pressing any key for selecting scenes by chapter number, the operation is cancelled. • You can press RETURN key to cancel time search. • You can press RETURN key to cancel title search.
2X” is displayed on the screen and the picture is now larger. By pressing ZOOM key number of times until “Subtitle Off” appears on the screen. Changing Audio Soundtrack Language 1/4x” modes. It is possible to change the audio language from the one selected at the initial settings to a different language, if available. NOTE: You can move in the picture, i.e. change the zoomed location, by using the “ ” (Left) or “ ” (Right) / “ ” (Down) / “ ” (Up) arrow keys.
Stopping play Using a DVD Menu Some DVD discs have unique menu structures called DVD menus. For example, DVDs programmed with complex contents provide guide menus, and those recorded with various languages provide menus for audio and subtitle language. Although the DVD menus’ contents and operation differ from disc to disc, the following explains basic operation when this feature is used. • To stop the play permanently, press STOP ( ) twice.
Press ( ) on the remote control. You can increase or decrease the speed of the slow-motion play by pressing SEARCH/SLOW (or) ). There are 4 slow motion modes ( as 1/16, 1/8, 1/4, 1/2. • If “Single elapsed” is displayed, the elapsed time for the title which is being played will be displayed. • If “Single remain” is displayed, the remaining time for the title which is being played will be displayed. The speed of slow motion play is displayed on the screen each time you change it.
During slideshow, you may change slide type (effect) by pressing ANGLE button. Audio CD Track: Elapsed or Remaining Time can be displayed using DISPLAY key and can be changed using INFO key. PAUSE Press PAUSE ( ) once during play. The play freezes. PAUSE message appears on screen. To return to normal play press PLAY ( ) again. Stopping Play Press STOP ( ). NOTE: You can move in the picture, i.e. change the zoomed location, by using the ( ) / ( ) / ( ) / ( ) arrow keys.
Time is displayed during MP3,MPEG and Audio CD track playback. Setup Menu DVD MENU ITEMS VIDEO SETUP PAGE Press DISPLAY key on the remote control when the player is not in playback mode. The setup menu-main page appears. To close the setup menu, press DISPLAY key. MAIN PAGE In the main page, the first page is selected by default. Select pages using / arrow buttons. When selected, the page will be highlighted and the items of the selected page will be displayed. Press SELECT or selected page.
PREFERENCES Note: Factory preset of the password is “0000”. You have to enter XXXX digital password every time you want to change the parental level. If you forget your password please contact technical service. Troubleshooting The picture quality is poor (DVD) • Make sure the DVD disc surface is not damaged. (Scratch, fingerprint etc.) • Clean the DVD disc and try again. DEFAULT If you choose RESET and press SELECT, the factory-presets are loaded. Parental level and parental password does not change.
No sound • Check the volume is set to an audible level. • Make sure you have not switched the sound off accidentally. Distorted sound • Check that the appropriate listening mode setting is correct. No response from remote control • Make sure the remote control is in the correct mode. • Check batteries are fitted correctly. • Change the batteries. If nothing works If you have tried the above solutions and none seem to work, try switching your TV-DVD off and on again.
Supported File Formats for USB & MC Modes Media File Extension .mpg/ .dat/ .vob Movie .avi Format Audio MPEG1 MPEG Layer 1/2/3 MPEG2 MPEG2 PCM/MP3 MPEG4 PCM/MP3 MS ISO MPEG4 PCM/MP3 Support SP and ASP PCM Sample Rate: 8K ~ 48KHz - XviD Verson up to: 1.1.2 MPEG 1/2 .mp3 - Sample Rate: 8K ~ 48KHz, Bit Rate: 64K~320Kbps Layer 1/ 2/ 3 (MP3) Baseline JPEG Photo (Maximum resolution/Bit rate etc.) XviD/ 3ivx Music Remarks Video .
Disc Types Compatible with This Unit This player can play the following discs. D is c Ty p e s (L o g o s ) R e c o r d in g Ty p e s D is c S iz e DVD 12 cm A u d io + V id e o A U D IO -C D 8 cm 12 cm M ax. P la y in g T im e S i n g le s id e d ; 2 4 0 m in . C h a r a c t e r is tic s • D V D c o n ta in s e x c e lle n t s o u n d a n d v id e o • V a r io u s s c r e e n a n d a u d io fu n c t io n s c a n b e D o u b le s id e d ; 4 8 0 m in . S i n g le s id e d ; 8 0 m in .
Specifications DVD / CD / CD-R / CD-RW / MP3 / JPEG / MPEG Types of Discs Supported DVD: SS/SL 4.7” (DVD-5) SS/DL 4.7” (DVD-9) DS/SL 4.7” (DVD-10) DS/DL 4.
Product Guarantee This product is guaranteed against manufacturing defects for a period of 1 Year This does not cover the product where the fault is due to misuse, abuse, use in contravention of the instructions, or where the product has been the subject of unauthorised modifications or alterations, or has been the subject of commercial use In the event of a problem with the product within the guarantee period please return it to your nearest store If the item is shown to have had an inherent defect present
QUICK GUIDE L22DP03E A IMPORTANT - If placing TV into cabinet or alcove, ensure there is at least a 100mm (10cm) gap to the sides, rear and top of the TV. This is to allow for adequate ventilation during operation. Please read the main Users Guide for more safety information before installation. insert the batteries into your handset Rear view either connect the aerial straight to your TV... wall socket Aerial (RF) Lead Aerial (RF) Socket ...or connect the aerial through a VCR...
...or through a HDMI and YPBPR products (DVD-RW) TFT-LCD TV Aerial (RF) Socket • Scart Lead to AV-1 on TV. (RF) connector lead Device to TV COMPONENT ANTENNA wall socket Aerial (RF) Lead Y AUDIO OUT PB ANT.IN HDMI OUT PR DVD RECORDER Note : These three methods of connection perform the same function but in different levels of quality. It is not necessary to connect by all three methods.
connect the TV plug to the mains socket UK plug European plug insert plug... ...and switch on insert plug... switch your TV on by setting the on/off button to position | . NB: When the set is first switched on, the set will be in standby and the indicator on the front of the set will illuminate red. Press Operate/Standby or channel up down (P- , P+) or numeric buttons (1, 2, 3, ...) to operate. basic functions of remote control INFO SLEEP SCREEN SOURCE PRESETS To select a programme number.
start A.P.S. (Auto Programming System) 1 When the TV is turned on for the first time, the menu for the language selection appears on the screen. The messag e “Welcome please select your language!” is written in all language options sequentially in the menu on the screen. By pressing or buttons highlight the language you want to set and press OK. After then, First time Installation Menu will appear on screen. By pressing | or } buttons, select country item you want to set and press OK button.
important note before using DVD In TV mode repeatedly press the AV button until DVD is selected then press the DVD button on the remote control. DVD cannot be operated unless user selects DVD mode on remote control. how to watch a DVD 1 Switch the TV on. 2 Press DVD button on Remote Control. 3 Press play button if there is a disc inside of the loader. 4 If there is no disc inside of the loader please insert a disc properly.
50150822 www.hitachidigitalmedia.