Operation Manual

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
9
Getting Started
TV - Control buttons (left side)
1.Up direction
2. Down direction
3. Programme/Volume / AV / Standby-On selection
switch
The Control switch allows you to control the Volume/
Programme/ Source and Standby-On functions of the
TV.
To change volume: Increase the volume by pushing
the button up. Decrease the volume by pushing the
button down.
To change channel: Press the middle of the button,
the channel information banner will appear on screen.
Scroll through the stored channels by pushing the button
up or down
To change source: Press the middle of the button twice,
the source list will appear on screen. Scroll through the
available sources by pushing the button up or down.
To turn the TV off: Press the middle of the button down
and hold it down for a few seconds, the TV will turn into
standby mode.
NOTE: You can move the switch, upward or
downward to change the volume. If you want to change
the channel, press the middle of the switch once
(Position 3) and then move upward or downward. If
you press the middle of the switch once more, the
source OSD will be displayed. To select desired source,
move the switch upward or downward and release. If
you press the middle of the switch and hold for a few
seconds, the TV will switch to standby mode. The Main
menu OSD cannot be displayed via the control buttons
on the TV.
Standby-LED