Operation Manual

1. Stand is placed on a flat surface.
2. The product is held over the
stand so that it concides with the
stand mounting point and then it
is left to be mounted with its own
weight.
1. TV is laid on a soft flat surface to
avoid scratches, so that
backcover will be on topside.
2. Push the button on the stem of
the stand.
3. Stand is pulled back.
4. Stand is detached.
Detachable Stand Installation Method
Detachable Stand Uninstallation Method
IMPORTANT - If placing TV into cabinet or alcove, ensure there is at least a 100mm (10cm) gap to the sides,
rear and top of the TV. This is to allow for adequate ventilation during operation. Please read the
main Users Guide for more safety information before installation.
For any help concerning set up and use of your TV please call theCustomer Helpline:
0845 604 0105
Lines open: 9am - 8pm Monday to Saturday and 10am - 4pm Sunday
Please read this quick guide fully before installing or operating because it contains important setup information and keep for
future reference.
QUICK GUIDE
L24VG07U
529/8824