Operation Manual

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
17
Connections
Side AV Connections
1. For connecting a camcorder, connect to the VIDEO
IN socket and the AUDIO SOCKETS. For selecting the
related source, see the section “Input selection” in the
following parts.
2. To listen the TV sound from headphones, connect to
the HEADPHONE jack of theTV.
Using a Conditional Access Module
IMPORTANT: Insert or remove the CI module only
when the TV is SWITCHED OFF.
In order to watch certain digital channels, a conditional
access module (CAM) can be necessary. This module
must be inserted in the CI slot of your TV.
1. Obtain the Conditional Access Module (CAM) and
the viewing card by subscribing to a pay channel
company, then insert those to the TV using the following
procedure.
2. Insert the CAM and then the viewing card to the slot
that is located in the terminal cover at the rear side of
the TV.
3. The CAM should be correctly inserted, it is impossible
to insert fully if reversed. The CAM or the TV terminal
may be damaged if the CAM is forcefully inserted.
4. Connect the TV to the mains supply, switch on and
then wait for few moments until the card is activated.
5. When no module is inserted, “No Common Interface
module detected” message appears on the screen.
You can refer to the module instruction manual for
details of the settings.
fi g. 1
CAM
module
fi g. 2
Camera
AVCable
(notsupplied)
Headphone
01_MB62_[GB]_IDTV (ARGOS)_BRONZE19_3902UK_26882W_10079030_50218926.indd 17 07.05.2012 17:20:42