LCD Colour Television Télévision Couleur LCD LCD-Farb-TV-Gerät Televisione a Colori LCD L32A01 A Instructions for use GB Notice d'utilisation F Bedienungsanleitung D Istruzioni per l'uso I
Contents Safety Precautions ........................................... 3 Features ............................................................. 6 Accessories ...................................................... 6 LCD TV Front View ........................................... 7 Rear View and Peripheral Connections ....... 7 Remote Control Buttons ................................. 8 Installation Of The TFT TV To The Wall .......... 9 Preparation ......................................................
Dot Clock .................................................... 19 Sound in PC mode ...................................... 19 Other Features ................................................ 20 TV Status ................................................... 20 Mute Indicator ............................................ 20 PIP and PAP Modes .................................... 20 AV Modes .................................................. 20 Zoom Modes .............................................. 20 Auto .....
DON’Ts Safety Precautions Please read the following recommended safety precautions carefully for your safety. IMPORTANT SAFETY INFORMATION ON OPERATING YOUR TV Do’s and Don’ts DO’s This Television has been designed and manufactured to meet international safety standards, but like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment.
1.Power Source The TV set should be operated only from a 220-240 V AC, 50 Hz outlet. Ensure that you select the correct voltage setting for your convenience. 2.Power Cord Do not place the set, a piece of furniture, etc. on the power cord (mains lead) or pinch the cord. Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock.
14. Connection to a television distribution system (Cable TV etc.) from tuner: Apparatus connected to the protective earthing of the building installation through the mains connection or through other apparatus with a connection to protective earthing - and to a television distribution system using coaxial cable, may in some circumstances create a fire hazard. To ground the antenna system properly, be sure that the cable grounding is connected with the building's grounding system.
Features • Remote controlled 32” colour LCD TV. • 100 programmes from VHF, UHF bands or cable channels can be preset. • It can tune cable channels. • Controlling the TV is very easy by its menu driven system. Phono L+R to 3.5mm Jack Audio Cable. • It has 3 Scart sockets for external devices (such as video, video games, audio set, etc.) • Stereo sound system (German+Nicam). • Full function Teletext (1000 pages).
LCD TV Front View SOURCE SELECT MENU BUTTON PROGRAMME UP/DOWN VOLUME UP/DOWN STANDBY BUTTON Standby LED IR Receiver FRONTVIEW Rear View and Peripheral Connections S-VIDEO Input Power On/Off Switch Component Audio Inputs s Video Input HDMI Input 2 SCART 1 Audio Inputss HDMI Input 1 SCART 2 Headphone PC VGA Input SCART 3 Audio Line Outss PC Audio Input For Service Use Only Subwoofer Output RF Power Cord Input Component Video Inputs (YPBPR) Note: Because FAV CVBS and SVHS Y are connecte
Remote Control Buttons = Stand by On/Offf = Info DVD = Select DVD TV/DTT DVD TV/DTT = TV / Quit Menu = Hold in teletext mode, Freeze picture / = Volume Up/ Down = Mute On/Off SAT INPUT AV1 1 AV2 2 AV3 3 AV4 4 HDMI2 7 AV5 5 HDMI1 6 8 9 RED (Only use in Teletext mode) 0 GREEN(Only use in Teletext mode) I/II = Teletext On-Offf P = Time / Teletext & TV = Menu On/Off ....
Installation Of The TFT TV To The Wall 1- To install the TFT TV on the wall, first of all, foot assembly should be removed. (Figure 1). Unscrew the 6 screws (M4 x 12) that attach the foot assembly to the TFT panel and remove the foot assembly from the TFT panel. 2- Decide the place on the wall where the TFT panel would be placed. Fix the wall mounting stencil on the wall. The stencil is used for placing the wall hangers on the wall, properly.
“Attention: Only the original wall bracket should be used with this product” GB - 10 A01-IB-ENG-(L32A01 A)-MB22-ANALOG-32810W-(RRC1001-2511E)-(BASIC 10 PIP)-10051693-50111148.p65 09.07.
Preparation For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Use this apparatus in moderate climates. Note: Remove the battery from remote control handset when it is not to be used for a long period. Otherwise it can be damaged due to any leakage of battery.
Switching The TV ON/OFF Initial Settings To switch the TV on: Your TV will switch on in two steps: 1- Connect the power cord to the system. Press Power On/Off switch. Then the TV switches itself to stand-by mode (optional). 2- To switch on the TV from stand-by mode either: Press a digit button on the remote control so that a programme number is selected, or Press the "-P/CH" or "P/CH+" button on the TV or press the P+ or Pbutton on the remote control, so that last mode switched off is selected.
AV Mode Press the AV button at the control panel on the the TV to switch your TV to AV modes. Menu System Picture Menu Operation with Remote Control The remote control of your TV is designed to control all the functions of the model you selected. The functions will be described in accordance with the menu system of your TV. PICTURE Functions of the menu system are described in the following sections. Mode Volume Setting Contrast Brightness Press + button to increase volume.
3D Comb 3D Comb is used to improve colour transitions and colour quality of pictures. to change the level of the balance.Balance level can be adjusted between -32 and +32. Headphone button, select 3D Comb. Press By pressing / button, select Headphone. Press By pressing / / button to set this feature On or Off. button to enter hedphone menu. Note: 3D Comb feature is not functional in NATU- volume RAL picture mode. By pressing / button, select Volume.
Dynamic Bass is not available if Subwoofer is set to On. Set Subwoofer to On when you connect an external subwoofer to the set. 3DS By pressing / button, select 3DS. 3DS can be set to On or Off. Set 3DS to On when you connect an external subwoofer to the set. If you select “3DS” On, AVL, Effect and Equalizer items will be invisible. Feature Menu PIP Picture Press button to enter PIP Picture submenu.
justments of Contrast, Brightness, Sharpness, Colour, Reset and Store items in this part are identical with Picture menu in the Menu System. Refer to Picture menu explanations in the previous parts. PAP Source Select PAP Source item by using / button. Use / button to set PAP source. Note: When main picture source is TV, AV-1, AV-2 or AV-3, PIP window can only be set to HDMI-1, HDMI-2, YPbPr (AV-5), PC source or vice versa.
Program Table APS (Auto Programming System) By pressing / button, select Program Table. Press to display Program Table. When you press the BLUE button for APS, Auto Programming System Menu will appear on the screen.
Band Colour System Band can be selected either C or S by press / By pressing / select Colour System. By pressing / button, you can change the colour system to button. PAL, SECAM, PAL 60, NTSC 4,43, NTSC 3,58 or Channel AUTO. Channel can be changed by / button or Digit VCR Buttons. By pressing / select VCR. By pressing / Colour System button, you can set the VCR to ON or OFF. By pressing / button, select Colour System.
H (Horizontal) Position PC Mode This item shifts the image horizontally to right hand side or left hand side of the screen. Installation • Power off both Computer and Display before making any connections. • Set your PC’s resolution correctly before connecting to the TV. See the table on Appendix A on page 28. • Use 15-pin display cable to connect a PC to the LCD TV. • Select H Position item by using / button. • Use / button to adjust the value.
Zoom Modes Other Features TV Status Programme Number, Programme Name, Sound Indicator and Zoom Mode are displayed on the screen when a new programme is entered. Mute Indicator It is placed in the upper side of the screen when enabled. Mute Zoom mode can be changed by pressing the button. You can change the screen size according to the picture aspect ratio. Select the optimum one from the following ZOOM modes. Note: • In YPBPR and HDMI modes, while in 720p-1080i resolutions, only FULL mode is available.
Teletext 4:3 Use to view a normal picture (4:3 aspect ratio) as this is its original shape. 14:9 Zoom This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen. Teletext system transmits informartion such as news, sports and weather on your TV. Note that if the signal becomes insufficient, some text errors may occur or the teletext mode may be quitted.Teletext function buttons are listed below: Teletext On/Off Activates teletext mode when pressed once.
Connect Peripheral Equipment Playback NTSC High Definition • Connect NTSC VCR player to a SCART socket of the TV. Your LCD Television is capable of displaying High Definition pictures from devices such as a High Definition Satellite Receiver or DVD Player. These devices must be connected via the HDMI socket or Component Socket. These sockets can accept either 720p or 1080i signals.
Tips Care Of The Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer. Poor Picture Have you selected the correct TV system? Is your TV set or house aerial located too close to non-earthed audio equipment or neon lights, etc.? Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial.
Peripheral Equipment Connections HEADPHONE AUDIO AUDIO IN (L) VIDEO IN (R) VIDEO IN OUT IN ANT.IN CAMCORDER SATELLITE RECEIVER ANTENNA Aerial Connection Outdoor Aerial Connection Round 75 ohm coaxial cable VHF/UHF Rear of TV GB - 24 A01-IB-ENG-(L32A01 A)-MB22-ANALOG-32810W-(RRC1001-2511E)-(BASIC 24 PIP)-10051693-50111148.p65 09.07.
Specifications DISPLAY Size/Diagonal Viewable screen size/Diagonal 32" (16:9 Display) 69.87 x 39.33 (cm) / 80.
Specifications OUTPUT CONNECTIONS Line Out Subwoofer Audio Speaker Output Synchronization Operator Control Keys Audio Phono L/R 1 x Phono (Mono) 2x8 W RMS Sync on green, composite sync with automatic detection separate H and V sync. On/Off, Standby, Vol+, Vol-, Prog +, Prog -, Menu, TV/AV.
Specifications Signal Input PC RGB Terminal (D-sub 15-pin connector) Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Input signal R G or sync on green B No connection No connection R.GND G.GND B.GND No connection GND No connection [SDA] H.sync or H/V composite sync V.sync. [V.
Appendix A: PC Input Typical Display Modes The display has a maximum resolution of 1360 x 768, frequency range of 56-75 Hz. The following table is an illustration of some of the typical video display modes. Mode 1 2 3 4 5 6 7 8 9 10 11 12 13 Resolution Frequency Horizontal Vertical Hor.(kHz) Ver.
Appendix B: AV and HDMI Signal Compatibility Source AV-1 (SCART 1) AV-2 (SCART-2) AV-3 (SCART-3) AV-4 FAV AV-4S (S-Video) AV-5 YPbPr HDMI1 HDMI2 Supported Signals PAL 50/60 NTSC 60 RGB 50 RGB 60 PAL 50/60 NTSC 60 RGB 50 RGB 60 PAL 50/60 NTSC 60 S-VHS 50 S-VHS 60 PAL 50/60 NTSC 60 PAL 50/60 NTSC 60 480I 60Hz 480P 60Hz 576I 50Hz 576P 50Hz 720P 50Hz 720P 60Hz 1080I 50Hz 1080I 60Hz 480I 60Hz 480P 60Hz 576I 60Hz 576P 60Hz 720P 60Hz 720P 50Hz 1080I 50Hz 1080I 50Hz 1080P 50Hz 1080P 60Hz 1080P 24 HZ Availabl
Appendix C: Main and PIP-PAP Picture Combinations M ain and PIP, PAP picture combinations MAIN TUNER AV-1 AV-1 AV-2 AV-2 AV-3 AV-3 F AV CVBS RGB CVBS RGB CVBS SVHS CVBS AV-4 PIP,PAP S-VHS YPbPr AV4-S AV-5 HDM I 1 HDM I 2 PC TUNER X X X X X X X X X X O O O AV-1 CVBS AV-1 RGB AV – 2 CVBS AV– 2 RGB AV-3 CVBS AV-3 SVHS X X X X X X X X X X O O O X X X X X X X X X X O O O X X X X X X X X X X O O O X X X X X X X X X X O O O
UK Guarantee Your Guarantee of Excellence Thank you for purchasing this Hitachi Television.
QUICK GUIDE L32A01 A IMPORTANT - If placing TV into cabinet or alcove, ensure there is at least a 100mm (10cm) gap to the sides, rear and top of the TV. This is to allow for adequate ventilation during operation. Please read the main Users Guide for more safety information before installation. insert the batteries into your handset + - Rear view + either connect the aerial straight to your TV... Aerial (RF) Lead Aerial (RF) Socket wall socket ...or connect the aerial through a VCR...
...or through a satellite decoder... TFT-LCD TV Aerial RF Lead from Satellite to TV • Scart Lead to AV-1 on TV. TV VCR ANT.IN RF Lead to Aerial Satellite LNB lead ...or through a VCR and satellite decoder. TFT-LCD TV RF Lead from VCR to TV RF Lead from VCR to Satellite Aerial • Scart Lead to AV-1 on TV. TV VCR ANT.IN RF Lead to Aerial Satellite LNB lead ANT.
connect the TV plug to the mains socket UK plug European plug Power Cord Power on/off Input button ...and switch on insert plug... Plug the mains lead into the TV... insert plug... switch your TV on by pressing the On/Off button TV/AV MENU P/CH Front View NB: When the set is first switched on, the set will be in standby and the indicator on the front of the set will illuminate red. Press the channel up down (P- , P+) or numeric buttons (1, 2, 3, ...) to operate.
important note before starting Auto Setup If you have a Video Cassette Recorder or a Satellite receiver connected to your TV please ensure that they are switched on before automatic tuning begins. In the case of a VCR, insert a pre-recorded tape and begin playback of your equipment. These measures ensure that all your external equipment is tuned in during the Auto Setup procedure. start A.P.S.
Hitachi, Ltd. Consumer Business Group Shin-Otemachi Bldg 5f, 2-1, Otemachi 2-Chome, Chiyoda-Ku, Tokyo 100-0004 Japan HITACHI EUROPE LTD. Consumer Affairs Department PO Box 3007 Maidenhead Berkshire SL6 8ZE UNITED KINGDOM Tel: 0870 405 4405 Email: consumer.mail@hitachi-eu.com HITACHI EUROPE S.A. 364, Kifissias Ave. & 1, Delfon Str. 152 33 Chalandri Athens GREECE Tel: 210 6837200 Fax: 210 6835694 Email: dmgservice.gr@hitachi-eu.
