Operation Manual

Once the TV has found all your local stations, they are then automatically

assigned a programme numbera nd name, if available from the broadcast.

important note.

start A.P .S. (A uto Pr ogramming System)

After APS is finalized, the programme table will appear on the screen. In the

programme list you will see the programme numbers and names assign ed to

the programmes.

After Automatic Search process is completed, a message asking for

analogue channel search appears on the screen. To continue Auto Program,

first set the language, country and teletext language by using or button and

then press the RED or OK button

For details, please refer to the Install Menu section of the instruction book.

When the TV is turned on for the first time, the menu for the language selection

appears on the screen. The message “Welcome please select your

language!” is written in all language options sequentially in the menu on the

screen. By pressing

or buttons highlight the language you want to set and

press OK. After then, First time Installation Menu will appear on screen. By

pressing

b uttons, select country it em you want to set and press OK b utton.

After the First Time Installation is set, the following message appears on the

screen.

To start automatic search, select “ Yes”, to cancel select “No”. This process will

take about five minutes. To cancel searching, you can press “ MENU” button at

any time during the process.

Do you want to start an automatic channel scan?

50139932