OWNER’S MANUAL LE32A300/LE42A300/LE55A300 LB32R3A/LB42R3A/LB46R3A/LB55R3A LE32H300/LE42H300/L32K3/L42K3 LED-LCD TELEVISION Please READ this manual carefully before operating your TV, and retain it for future reference.
Contents Contents 3 Function Menu ...................................................18 Important Safety Instructions 4 Introduction 6 Adjust Menu .......................................................19 Time Menu..........................................................19 Lock Setup ..........................................................20 Warning Function Menu Set ............................................................ 18 Panel Control ...................................................
Warning Warning WARNING: ! WARNING RISK ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. * To avoid electric hazards, it is strongly suggested that the back cover not be opened, as there is no any accessory inside the casing. * lf necessary, please contact authorized after-sales services.
Important Safety Instructions Important Safety Instructions 4 LED -LCD television Owner’s Manual
Important Safety Instructions LED -LCD television Owner’s Manual 5
Panel Control Introduction - This is a simplified representation of front panel. - Here shown may be somewhat different from your TV. Panel Control TV/AV Press this key to open/close signal source options menu. 8 SPDIF Digital Audio Optical output. 2 MENU Menu display. Press to access the on-screen menu display. 9 AV OUT Connect the audio L/R and video cables to your other video equipment. 3 VOL +/- Press to adjust the volume. In the MENU screen, these buttons serve as right/left buttons.
Connection Options Connection Options Pb Pr L AUDIO R PC IN 2 PC/DVI AUDIO PC AV OUT 1 AV2 IN COMPONENT IN Y HDMI 3 IN ANT IN Back panel connections L AUDIO R L AUDIO R VIDEO HDMI 3 IN VIDEO PC PC/DVI AUDIO PC IN Y / VIDEO Pr Pb COMPONENT / AV2 IN 1 PC Video In Connect a video cable from a computer to this jack.. 2 PC/DVI Audio In Connect the audio L/R cables from a computer to this jack. 3 Component Video In Connect a component video device to these jacks.
Remote Control Remote Control Battery loading 1. Slide open the cover of the battery compartment on the back of the remote controller. 2. Load two 7# (AAA) alkaline batteries in the compartment, (plus and minus poles to respective mark) 3. Replace the cover of the battery compartment. Precautions As strong light may interfere the signals, change your position to operate the remote controller if the television cannot be turned on or off as you expect.
Remote Control Function Remote Control Function - The remote control cannot be operated unless the batteries are properly loaded. - When using the remote control, aim it at the remote control sensor on the TV. Function introduction 1 POWER 2 3 4 5 USB H. LOCK SOURCE DSMB 6 STILL 7 ARC 8 MUTE 9 0-9 0 Q. VIEW A VOL+ /B CH+/C Sound Mode D Picture Mode E TV.MENU F D.MENU THUMBSTICK (Up/ Down/Left/Right) H OK I EXIT G J USB K L M N O P Q R S T U V W X Y Z [ \ TV.
External Equipment Connections External Equipment Connections Antenna Connection - Antenna or Cable Service without a Cable Box Connections. - For optimum picture quality, adjust antenna direction if needed. Note: * It is recommended that you'd better use 757 coaxial cable to remove the disturbance caused by airwave. * Don't bind antenna cable and electric wire together. To improve picture quality in a poor signal area, purchase and install a signal amplifier.
External Equipment Connections Choose Your Connection select the source, press the OK button to confirm. There are several ways to connect your television, depending on the components you want to connect and the quality of the signal you want to achieve. The following are examples of someways to connect your TV. Take LE32A300 as an example, Choose the connection which is best for you.
External Equipment Connections PC/DVI AUDIO Y / VIDEO Pr Pb - AUDIO- L - AUDIO - R COMPONENT / AV2 IN DSMB PC How to use A B C D PC/DVI AUDIO Use the SOURCE button on the remote control,and then press / button to to select COMPONENT mode, press the OK button to confirm. Press Play button on external equipment for program play. L - AUDIO - R DSMB Refer to the DVD player’s manual for operating instructions. How to connect A B Use the TV’s PC IN port for video connections.
External Equipment Connections Note ❏ Component, PC, HDMI input sources cannot be used for Monitor out. ❏ When connecting with external audio equipments, such as amplifiers or speakers, please turn the TV speakers off. Power source HDMI 3 IN TO USE AC POWER SOURCE PC PC/DVI AUDIO Y / VIDEO Pb PC IN L - AUDIO - R Pr COMPONENT / AV2 IN DSMB Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard polarized AC outlet.
Basic Receiving and Playing Operations Basic Receiving and Playing Operations Playing Operations Choose the Input source Change the picture source so you can watch your TV, VCR, Cable , or any other devices that are connected to your TV. A Switching ON/OFF the TV set In the manual, the OSD (on screen display) may be different from your TV’s because it is just an example to help you with the TV operation.
Basic Receiving and Playing Operations Palette: How to customize your own picture status A Press MENU button and then use select Picture menu. Press / to select the Palette option, and then press OK to enter its submenu, and finally press / to select a toner pattern from six patterns (Cool2, Cool1, Standard, Warm1, Warm2, User) to your color preference. Normally, the Standard mode is selected. / button to B Press / button to select the desired items., press OK to enter its submenu.
Basic Receiving and Playing Operations • You can also press S.MODE button on the remote control to select the Audio Mode: Standard, Music, Movie and User. The surround sound feature expands the audio listening field wider and deeper to create exceptional sound quality from the TV’s speakers. AVL (Automatic Volume Limit) How to Customize your own sound status A B C This will reduces the differences in volume level among broadcasters.
Basic Receiving and Playing Operations 1. Use Direct-digit Choosing button to select the number of the channel to be recovered. 2. Do the above steps again. 3. Press / to set Skip as Off. Auto Tuning A / button to Press MENU button and then use select Channel menu. B Press / button to select Auto Tuning, then press OK the menu opens. C Press / button to select OK, press OK button on the remote to start to scan.
Basic Receiving and Playing Operations • Press / to select the Picture Optimize option. • Press OK to enter the submenu. / to select theDCDI/Color • Press Management to be adjusted, and then press / to select ON or OFF. / to select the DNR to be adjusted, and • Press then press / to select Low/Middle/High/ Off.
Basic Receiving and Playing Operations Clock This is used for adjusting the phase of pixel clock in PC mode. Phase This is used for adjusting H Position and V Position as well as relative parameters in PC modes. Reset Return to factory default settings. Reset Press / to select OK or Cancel which with Do you want to reset option values. Adjust Menu The TV can be used as a display, and you may adjust relevant settings. Press SOURCE to switch the signal input to PC mode.
Basic Receiving and Playing Operations the On/Off Time function is enabled while OFF indicates the function is disabled. • .After finishing time setting, press OK or MENU to confirm. If there is no operation for a few seconds, the display will automatically disappear. The Lock Set menu is as follows: Note Lock Set After setting the On/Off Time function, if the TV is AC off or forcible DC off, the function will be automatically cleared.
Basic Receiving and Playing Operations Only when the Preset Source is set as TV can the Preset Channel option be available. Press / to select preset channels from 0-254. Source Lock This function is used to prohibit watching a program from various external inputs, e.g. AV and PC, etc. Press / to select a certain option, and then press OK to enter the submenu, press / to set an external input lock ON or OFF.
Basic Receiving and Playing Operations D To achieve smooth playing, ensure the following: • The file code rate should be lower than 300KB/S; • Due to the limitation of USB signal transmission distance, it is recommended not to use USB patch cord, in case of using the cord, make sure that its length is not over 1m; • Use high-speed USB equipment in conformity with USB2.0 Interface Standard; if USB equipment in conformity with USB1.1 Interface Standard is used, the playing may be unsmooth.
Basic Receiving and Playing Operations D select the music you want to play, and then press OK to play the music. To exit playing, just press BACK repeatedly. Playing a Movie A After entering USB main interface, press / to select a harddisk partition, and then press / to select the "Movie" option. D To exit music playing, just press BACK repeatedly. Text B C Press OK to confirm the selection and enter the movie playing interface.
Maintenance/Troubleshooting (such as a vacation), it’s a good idea to unplug the power cord to protect against possible damage from lightning or power surges. Troubleshooting Photo Slide Time Set the scan speed of pictures to be scanned in slide form. There are three options (Middle/Slow/fast). Press / to select the desired option. Movie Subtitle Select "ON" or "OFF".
Specifications/Format Note ❏ Do not leave the television with static picture in an extended period as it may result in residual image on your television screen. Accessories x1 x1 x2 (This is only available for certain models,please refer to actual products.) Product main size (contain stand) Note ❏ Production of the screen requires high and precision technologies. However, there might be some dank or bright (red, blue or green) spots, or some anomalistic stripes or spots. This is not defect.
Format sequence number Format H-Frequency (KHz) V-Frequency (Hz) 1 640*480@60Hz 31.5 60 2 800*600@60Hz 37.88 60 3 1024*768@60Hz (Recommendatory) 48.
Maintenance / Troubleshooting/Specification LED -LCD television Owner’s Manual 27
Specification / Format LED -LCD television Owner’s Manual 28