Operation Manual
English -24-
Source menu
By pressing
a
/
b
button, select the sixth icon and
press
`
or OK button. Source menu appears on the
screen.
SOURCE : TV
TV
AV - 1
AV - 2
AV - 4
AV - 7
TUNER
SCART
SCART
YPbPr
FAV
SVHSAV - 5
AV - 6
HDMI
PC RGB
HDMI
DTT
AV - 2 S
SCART+SVHS
AV - 3
In source menu, highlight a source by pressing
a
/
b
button and switch to that mode by pressing
`
or
OK button. Source options are; TV , AV -1, AV-2, AV-2
S , AV-3 , AV-4 , AV- 5, AV- 6, AV- 7 , P C R GB and DTT.
PC Mode
Installation
• Power off both computer and display before making
any connections.
• Set your PC’s resolution correctly before connect-
ing to the TV. See the table on Appendix A on page
33.
• Use 15-pin display cable to connect a PC to the LCD
TV.
Menu System in PC mode
Sound Menu/Feature Menu
The items in these menus are described at Sound &
Feature Menu explained in “Menu System”.
PC Picture Menu
By pressing
a
/
b
button, select the second icon. PC
Picture menu appears on the screen.
Brightness, Contrast and Colour Temperature adjust-
ments in this menu are identical to adjustments de-
fined in TV picture menu in “Analogue TV Menu Sys-
tem”.
PC Picture Position Menu
By pressing
a
/
b
button, select the first icon and
press
`
or OK button. PC Picture Position menu ap-
pears on the screen.
A
uto
p
osition
H Position 9
V
Position 50
Dot C lock 100
Phase 31
Autoposition
If you shift the picture horizontally or vertically to an
unwanted position, use this item to put the picture into
correct place automatically.
• Select Autoposition item by using
a
/
b
buttons.
Press or OK button.
Warning: Auto position adjustment recommended
to be done with the full screen image for
the prope r adjustment.
H (Ho ri z o nt a l) Position
This item shifts the image horizontally to right hand
side or left hand side of the screen.
• Select H Position item by using
a
/
b
button.
•Use
_
/
`
button to adjust the value.
V (V e rtical) Position
This item shifts the image vertically tow ard s the top or
bottom of the screen.
• Select V Position item by using
a
/
b
button.
•Use
_
/
`
button to adjust the value.
Dot Clock
Dot Clock adjustments correct interference that ap-
pear as vertical banding in dot intensive presenta t i o n s
like spreadsheets or paragraphs or text in smaller fonts.
•Use
_
/
`
button to adjust the value.
Phase
Depending on the resolution and scan frequency that
you input to the TV Set, you may see a hazy or noisy
picture on the screen. In such a case you can use
this item to get a clear picture by trial and error method.
•Use
_
/
`
button to adjust the value.
Sound in PC mode
• Connect the PC’s Audio output to the TV’s PC Audio
In socket with an audio cable.