Operation Manual

English -32-
Signal Input
PC RGB Terminal (D-su b 15-pin conne ctor)
Pin I nput signal
1R
2 G or sync on green
3B
4 No connection
5 No connection
6R.GND
7G.GND
8B.GND
9 No connection
10 GND
11 No connection
12 [SDA]
13 H.sync or H/V composite sync
14 V.sync . [V.CLK]
15 [SCL]
• When different kinds of input signals are simul-
taneously input to the monitor via a graphics
board or the like, the monitor will automatically
selec t the sign als in the follow ing prio r it y order :
Sync signal type Priority
H/V separate sync. 1
H/V composite sync. 2
sync.on Green * 3
• Even in the case of the recommended signals
shown on the following page, there may be
instances when correct display is not pos-
sible. In this case, use H/V separa te sync, H/
V composite sync.
S-inpu t conne ct or pin specific a t io ns
Pi n Input signal
1Y
2Y-GND
3C
4C-GND
Frame GND
HDMI conne ctor pin spec if ic atio ns
Pin I nput si gnal Pin Input signal
1 TMDS Data2+ 11 TMDS Clock Shield
2 TMDS Data2 Shield 12 TMDS Clock-
3TMDSData2-13 CEC
4 T MDS Data 1+ 14 Reserved (N.C. on device)
5 TMDS Data1 Shield 15 SCL
6 T MDS Data1- 16 SDA
7 TMDS Data0+ 17 DDC/CED Ground
8 TMD S Data0 Shie ld 18 +5V Power
9 T MDS Data0- 19 H ot Plug Detect
10 TMDS Clock+
SCART connector pin specifications
Pin Input signal Pin Input signal
1 AUDIO OUT (RIGHT) 12 Not used
2 A UDIO IN (RIGHT) 13 RGB-R GND
3 AUDIO OUT (LEFT/MONO) 14 GND
4 AUDIO GND 15 RGB-R / S.VHS CHROMINANCE IN
5 RGB-B GND 16 BLANKING SIGNAL
6 AUDIO IN (LEFT/MONO) 17 COMPOSITE VIDEO GND
7 RGB-B IN 18 BLANKING SIGNAL GND
8 AUDIO / RGB SWITCH / 16:9 19 COMPOSITE VIDEO OUT
9 RGB-G GND 20 COMPOSITE VIDEO / S.VHS LUMINANCE IN
10 Not used 21 GND / SHIELD (CHASSIS)
11 RGB-G IN
Speci fica t io ns