Cover J3LF0421A.ai 1 2/8/12 10:27 AM C M Y CM MY CY CMY K Thank you for purchasing this Hitachi product. Please read these instructions carefully. For additional assistance please Call Toll Free 1-800-289-0981 (USA/CANADA), 01-800-703-0885 (MEXICO) or visit our website at www.hitachi.us/tv. Keep this owner’s guide for future reference. Record the model name and serial number of your LCD Television for future reference.This information is located on the back of the television.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
IMPORTANT SAFETY INSTRUCTIONS (continued) 24) Do not allow the product to output distorted sound for an extended period of time. It may cause speaker overheating and fire. 25) This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
CHILD SAFETY NOTICE 5 EN J3LF0421A_EnEs.
SAFETY PRECAUTIONS The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunlight. When placing on a shelf leave 4 inches (10 cm) free space around the entire unit.
How to attach the stand NOTE: • Unplug the AC cord from the AC INPUT terminal. • Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid any damage to the unit. • Do not touch or press the LCD screen, the glass might break under pressure. Place the TV on its front onto a table. Align the stand’s bottom-plate (supplied) as seen here. It will fit in only one direction.
Features LCD color TV Unique space saving design combines a 40” class LCD color TV. • Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box. • Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers. • Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.
Contents Before using your unit IMPORTANT SAFETY INSTRUCTIONS ............................................................................................................................... 3 CHILD SAFETY NOTICE ...................................................................................................................................................... 5 SAFETY PRECAUTIONS ................................................................................................................................
Location of controls Front Left side POWER button CH (CHANNEL) / buttons VOL (VOLUME) +/– buttons MENU button INPUT/ENTER button Power Indicator Red : Standby Green : On To display the menu screen. Press MENU button to display the menu screen. CH (CHANNEL) / buttons, VOL (VOLUME) +/– buttons and INPUT/ENTER button can be used to select the desired setting during the menu screen operations.
Remote control 1 2 12 13 3 4 14 5 15 6 7 8 9 10 11 16 17 18 1.POWER Button - Press to turn the LCD TV’s power on/off. 2.AUDIO Button - Press to change the audio language. 3.Direct Channel Selection Buttons (0-9) - Allows direct access to any channel of the LCD TV. 4.– Button -This button is the “–” button used when selecting digital channels. Before using the remote control, batteries must first be installed. HOW TO INSTALL BATTERIES 1. Open the battery compartment cover. 2.
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm cable) Connect the 75 ohm cable from the combination VHF/UHF antenna to the Antenna Jack. Antenna Jack 75 ohm Coaxial Cable Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box.
Starting setup TO SELECT ANALOG CHANNELS 1-9: Press 1-9 as needed. Example, to select channel 2, press 2, then press ENTER. 10-99: Press the 2 digits in order. Example, to select channel 12, press 1, 2, then press ENTER. 100-135: Press the 3 digits in order. Example, to select channel 120, press 1, 2, 0, then press ENTER. TO SELECT DIGITAL CHANNELS Press the first 1-3 digits, then press the – button followed by the remaining number. Example, to select channel 15-1, press 1, 5, –, 1, then press ENTER.
DISPLAY Press DISPLAY to display the current information on the screen. When the TV receives a digital signal, the digital information will appear. 62-1 HDTV_Moving_Picture... CH-1 Digital TV-MA Air Quick guide for menu operation Example: Select Menu Language. 1 2 Sleep Timer Off English No Program Information is available USB Memory Information ■ Play Time : --:--:-Message: Now Live View USB Memory is unplugged Press INPUT to select TV mode. Press MENU. The TV menu screen will appear.
Convenience functions You can change the default settings by pressing the MENU button on your remote, then select the one of the icons at the left of the menu follow the On-Screen prompts to set your preferences.
Memorizing channels This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’s memory. To use this TV with an antenna, set the Source option to the Air mode. When shipped from the factory this menu option is in the Cable mode.
Checking the digital signal strength This TV will allow you to view the digital signal meter for digital channels. 1 2 Select “Channel ⇒ Signal Meter”, then press ▶ or ENTER. The digital signal strength screen will appear. If necessary, adjust the direction of the antenna to obtain the maximum signal strength. CH Signal Meter To clear a Channel Label After step 2 above, press ▲ or ▼ to select “Label Clear”, then press ▶ or ENTER. NOTE: • The channel labels will be reset after “Scan” on page 16.
To set the Parental Control 1 2 3 4 5 Canadian English ratings Select “Locks”, then press ▶ or ENTER. CAN ENG Rating Use Number buttons (0-9) to enter your password, then press ENTER. The Locks menu will appear. E C C8+ G PG 14+ 18+ Press ▲ or ▼ to select “Parental Control”, then press ◀ or ▶ to select “On” . Press ▲ or ▼ to select “Ratings”, then press ▶ or ENTER. The Ratings menu appears. You can set the rating using age level.
To change the password 1 2 3 In the Parental Control menu, press ▲ or ▼ to select “Change Password”, then press ▶ or ENTER. The Change Password screen will appear. Enter a new password using Number buttons (0-9), then press ENTER. Enter the same password again to confirm, then press ENTER. The password is now registered.
CC advanced When you have selected Custom as the display method, you can adjust the various setting listed below as follows: NOTE: • Selectable picture format aspect ratios may vary depending on the input source or broadcast signal. • Aspect menu also can be displayed by pressing ASPECT on the remote control. This feature is designed to customize Digital Captions only. Natural 1 2 3 4 5 Select “Setup ⇒ Closed Captions”, then press ▶ or ENTER.
Time Shift You can record a digital program by using the USB memory drive. This function is for your convenience, and allows you to pause/record a live program for a period of time based on the size of the USB drive inserted. Note: The connected USB device must; • • • • • Have a minimum approx. 100 MB of memory (32 GB max.). Formatted as FAT16/32. Have a write speed higher than 40Mb/sec. Contain no other files. Do not use USB extension cable.
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs.
Connections to other equipment (continued) To connect an audio system This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the TV’s remote control. To control the audio, turn on the TV and the stereo amplifier, and turn off the TV’s built-in speakers (see page 15). Rear of the unit Amplifier To VAR.
Connections to other equipment (continued) To connect a HDMI or a DVI device to the unit The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.
Reception disturbances IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. GHOSTS: Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected from tall buildings, hills or some other objects. Changing the direction or position of the antenna may improve reception.
Troubleshooting Use the following checklist for troubleshooting if you have problems with your LCD TV. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS SYMPTOMS Make sure the power cord is plugged in. Try another AC outlet. Power is off, check fuse or circuit breaker. Unplug unit for an hour, then plug it back in. Digital broadcasting screen problem. • Check digital signal strength.
Specifications GENERAL Power supply Power consumption Weight Dimensions Operating temperature Operating humidity TELEVISION Type Display method Number of Pixels Broadcasting system Receiving channels Tuner type Inputs Outputs Speakers Audio output power ACCESSORIES AC 120V, 60Hz Operation: 147W Standby: 0.3W 15.0 kg (33.1 lbs) Width: 986 mm (38-7/8 inches) Height: 667 mm (26-5/16 inches) Depth: 236.9 mm (9-3/8 inches) 5˚C - 40˚C Less than 80% RH 1016.1 mmV (40″ class/40.
LIMITED WARRANTY 40” LCD HDTV ORION AMERICA, INC (“ORION”) warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 1 year from date of original purchase in the United States, Canada and Mexico.
PRECAUCIÓN RIESGO DE DESCARGA ELECTRICA NO ABRIR El símbolo del rayo dentro de un triángulo equilátero tiene por finalidad alertar al usuario acerca de la presencia de tensión peligrosa (sin aislación) en el interior del producto, que puede tener la intensidad suficiente como para constituir un riesgo de descarga eléctrica. AVISO: PARA REDUCIR EL RIESGO DE DESCARGA ELEC- TRICA, NO RETIRE LA CUBIERTA (O POSTERIOR).
INSTRUCCIONES DE SEGURIDAD IMPORTANTES 1) Lea estas instrucciones. 2) Conserve las instrucciones. 3) Tenga en cuenta todos los avisos. 4) Siga todas las instrucciones. 5) No utilice este aparato cerca del agua. 6) Limpie el equipo con un paño seco. 7) No bloquee las rendijas de ventilación. Instale el equipo según las instrucciones del fabricante. 8) No lo instale cerca de fuentes de calor, como radiadores, registros de calor, hornos o demás aparatos (incluidos amplificadores) que produzcan calor.
INSTRUCCIONES DE SEGURIDAD IMPORTANTES (continuación) 25) Se ha incluido este recordatorio para llamar la atención de quien instale el sistema TV cable, con respecto al Artículo 820-40 de la NEC, que entrega directivas de guía para realizar una conexión adecuada a tierra y, en particular, especifica que el cable de puesta a tierra debe ser conectado al sistema de conexión a tierra del edificio, lo más cerca del punto de entrada del cable como sea posible.
AVISO DE SEGURIDAD PARA NIÑOS 5 ES J3LF0421A_EnEs.
PRECAUCIONES DE SEGURIDAD La unidad emite calor cuando está en operación. No coloque cobertores ni frazadas sobre la unidad; ello puede causar sobrecalentamiento. No obstruya los orificios de ventilación, ni instale cerca de radiadores. No la exponga a la luz solar directa. Cuando la coloque sobre una estantería, deje 4 pulgadas (10 cm) de espacio libre alrededor de toda la unidad.
Cómo instalar el soporte NOTA: • Desenchufe el cable de CA del terminal AC INPUT. • Antes de comenzar este proceso, asegúrese de que la televisión este colocada en un lugar limpio, seguro y acolchonado para evitar cualquier daño a la unidad. • No toque o presione la pantalla de la LCD, ya que el cristal podría romperse con la presión. Coloque la TV sobre su respaldo parte anterior de la mesa. Alinie la placa inferior del soporte (suministrada) tal y como se muestra aquí. Encajará solo en una dirección.
Características TV LCD a Color Diseño único ahorra-espacio que combina un TV LCD a color de 40”. • Sintonizador digital integrado - Podrá disfrutar de transmisiones digitales sin necesidad de utilizar un decodificador de TV digital. • Descodificador de leyendas codificada con modo de texto completo - Muestra las leyendas de los textos o el texto del programa en pantalla completa para las personas con problemas de audición.
Indice Antes de utilizar su aparato INSTRUCCIONES DE SEGURIDAD IMPORTANTES .......................................................................................................... 3 AVISO DE SEGURIDAD PARA NIÑOS ................................................................................................................................. 5 PRECAUCIONES DE SEGURIDAD......................................................................................................................................
Ubicación de los controles Parte delantera Lado izquierdo Botón POWER Botones CH (CHANNEL) / Botones VOL (VOLUME) +/– Botón MENU Botón INPUT/ENTER Indicador Power Rojo: Standby Verde: Encendido Para visualizar la pantalla de menú. Presione botón MENU para visualizar el menú en la pantalla. Botones CH (CHANNEL) / , botones VOL (VOLUME) +/– y botón INPUT/ENTER pueden emplearse para seleccionar la configuración deseada en el menú.
Control remoto 1 2 12 13 3 4 14 5 15 6 7 8 9 10 11 16 17 18 1.Botón POWER - Pulse para encender o apagar el TV LCD. 2.Botón AUDIO - Pulse para cambiar el idioma de audio. 3.Botones de selección directa de canal (0-9) - Permite acceso directo a cualquier canal del TV LCD. 4.Botón – - Este botón es el botón “–” que se utiliza cuando se seleccionan canales digitales. 5.Botón MENU - Presione este botón para indicar el menú de función en la pantalla.
Conexiones de la antena Si usted está utilizando una antena para interiores o exteriores, siga las instrucciones de abajo que correspondan a su sistema de antena. Si está utilizando el servicio de TV por cable (CABLE), vea la “Conexiones de por TV cable”. Antena combinada de VHF/UHF (Cable único de 75 ohmios) Conecte el cable de 75 ohmios de la antena combinada de VHF/UHF en el toma de la antena.
Configuración inicial El menú de Auto Setup aparece la primera vez que enciende la TV, y le ayuda a seleccionar el especificar la opción Air/ Cable, y programar sus canales de forma automática. IMPORTANTE: ¡Cerciórese de que la antena o sistema de cable de TV este conectado! 1 Para encender el aparato, presione POWER. (El indicador POWER en el frente de la unidad cambia a verde. Puede llevar aprox. 10 segundos para que aparezca una imagen en la pantalla.) La función de Auto Setup comienza.
DISPLAY Presione DISPLAY para ver en pantalla la información actual. Si el televisor recibe una señal digital, presione este botón para consultar la información digital. CH-1 Digital TV-MA Air Ejemplo: Seleccionar Menu Language. 1 2 Sleep Timer Off 62-1 HDTV_Moving_Picture... Guía rápida para el manejo de menú English No Program Information is available USB Memory Information ■ Play Time : --:--:-Message: Now Live View USB Memory is unplugged Presione INPUT para seleccionar modo TV.
Otras funciones prácticas Puede cambiar la configuración predeterminada presionando el botón MENU en control remoto, después seleccione uno de los iconos en la parte izquierdo del menú - siga las instrucciones en la pantalla para configurar sus preferencias.
Memorización de canales Este aparato está equipado con una función de memorización de canales que permite avanzar o retroceder al siguiente canal almacenado en la memoria, pasando por alto los canales no deseados. Antes de seleccionar canales, éstos deberán ser programados en la memoria del aparato. Para usar el aparato con una antena, ajuste la opción de aparato al modo Air. Al salir la unidad de fábrica la opción de menú de Source se ajusta al modo de Cable.
Comprobación de la intensidad de la señal digital Esta TV le permitirá ver el medidor de señal digital para canales digitales. 1 2 Seleccionar “Channel ⇒ Signal Meter”, luego presione ▶ o ENTER. El medidor de intensidad de la señal digital aparecerá. Si es necesario, ajuste la dirección de la antena para obtener la máxima intensidad de la señal. CH Signal Meter 0 50 Para eliminar una Channel Label Luego del paso 2 antedicho, presione ▲ o ▼ para seleccionar “Label Clear”, luego presione ▶ o ENTER.
Para ajustar el Parental Control 1 2 3 4 5 Clasificaciones canadiense en inglés Seleccionar “Locks”, luego presione ▶ o ENTER. CAN ENG Rating Utilice los Botones numéricos (0-9) para ingresar su contraseña, luego presione ENTER. Luego aparecerá el menú Locks. E C C8+ G PG 14+ 18+ Presione ▲ o ▼ para seleccionar “Parental Control”, luego presione ◀ o ▶ para seleccionar “On” . Presione ▲ o ▼ para seleccionar “Ratings”, luego presione ▶ o ENTER. Aparecerá el menú Ratings.
Para cambiar la contraseña 1 2 3 En el menu Parental Control, presione ▲ o ▼ para seleccionar “Change Password”, luego presione ▶ o ENTER. Aparecerá la pantalla Change Password. Entre la contraseña nueva con los Botones numéricos (0-9), luego presione ENTER. Ingrese nuevamente la misma contraseña para confirmar, luego presione ENTER. La contraseña queda registrada.
Subtítulos avanzados Cuando ha seleccionado Custom como método de pantalla, puede configurar las funciones que siguen a continuación: Esta función está diseñada para personalizar únicamente el teletexto digital. 1 2 3 4 5 Seleccionar “Setup ⇒ Closed Captions”, luego presione ▶ o ENTER. NOTA: • El tamaño de la imagen seleccionable puede variar dependiendo de la fuente de entrada o de la señal de emisión. • La pantalla del menú Aspect también se visualizará presionando ASPECT en el mando a distancia.
Pausa en directo Puede grabar un programa digital utilizando una unidad de memoria USB. Esta función es adecuada si no desea perderse un programa cuando no está delante del televisor. Nota: El dispositivo USB conectado debe; • • • • • Tener una memoria mínima aprox. de 100 MB (32 GB máx.). Estar formateado como FAT16/32. Tener una velocidad de escritura superior a 40Mb/seg. Estar vacío. No utilice un cable de extensión del USB. Preparación: Conecte un dispositivo de almacenamiento externo a un puerto USB.
Conexiones a otros equipos La instalación exacta a utilizar para hacer las conexiones de los distintos componentes de vídeo y audio en la unidad depende del modelo y funciones de cada componente. Confirme en el manual de instrucciones de cada componente la posición de las entradas y salidas de vídeo y de audio.
Conexiones a otros equipos (continuación) Para conectar un sistema de audio Esta conexión le permite usar un amplificador de audio y altavoces externos, y ajustar el nivel de audio usando el mando a distancia del TV. Para controlar el audio, encienda el TV y el amplificador de estéreo, y desconecte los altavoces incorporados del TV (ver página 15). Parte trasera del unidad Amplificador A salida de VAR.
Conexiones a otros equipos (continuación) Para conectar el unidad a un HDMI o a un dispositivo DVI La entrada HDMI recibe audio digital y vídeo no comprimido desde un dispositivo HDMI o vídeo digital no comprimido desde un dispositivo DVI. Si se conecta un dispositivo DVI a un cable adaptador HDMI-a-DVI, sólo transfiere la señal de vídeo. Se requieren cables de audio separados.
Disturbios de recepción RUIDO DE ENCENDIDO: Pueden aparecer puntos negros o rayas horizontales, la imagen puede variar o moverse. Usualmente causado por interferencia de un sistema de arranque de un auto, lámparas de neón, taladros eléctricos, y otros aparatos eléctricos. IMÁGENES FANTASMAS: Imágenes fantasmas son causadas por señales de televisión siguiendo dos rutas distintas. Una es de incidencia directa y la otra es reflejada en edificios altos, montañas u otros objetos.
Solución de problemas Consulte la siguiente lista de localización de errores si experimenta problemas con su TV LCD. Consulte con su concesionario local o tienda de servicio si continúan los problemas. Compruebe que se han hecho correctamente todas las conexiones cuando utilice el equipo con otros aparatos. SÍNTOMA SÍNTOMA POSIBLE SOLUCIÓN • Verifique que el cable de alimentación esté conectado. • Pruebe con otro tomacorriente de CA.
Especificaciones GENERALIDADES Fuente de alimentación Consumo de energía Peso Dimensiones Temperatura de operación Humedad de funcionamiento TELEVISOR Tipo Tipo de pantalla Número de pixeles Sistema de transmisión Canales de recepción Tipo de sintonizador Entradas Salidas Altavoces Potencia de salida de audio ACCESORIOS 120V CA, 60 Hz En funcionamiento : 147 Vatios En espera : 0,3 Vatios 15,0 kg (33,1 libras) Anchura : 986 mm (38-7/8 pulgadas) Altura : 667 mm (26-5/16 pulgadas) Profundidad : 236.
GARANTIA LIMITADA 40” LCD HDTV ORION AMERICA, INC (“ORION”) garantiza este producto contra defectos en sus materiales o de fabricación, bajo condiciones normales de uso, por un período de 12 meses a contar de la fecha de compra original, solamente en los Estados Unidos, Canadá y México.