Operation Manual

English - 23 -
IDTV Menu System
The IDTV menu can only be viewed when
watching digital terrestrial broadcasting. Press
the TV/DTV button to turn IDTV on while the TV
is in analogue mode.
Press the “ M” button. The menu below appears
on the screen:
Channel List
Using the “ ” or “ ” button on the remote
control, make sure that the fi rst item, Channel
List, is highlighted and press the OK button to
display the Channel List.
The following operations can be performed in
this menu:
• Navigating the entire list of channels
• Deleting channels
• Renaming channels
• Adding locks to channels
• Setting favourites
• Moving channels
Channel List is the place where the channels
are managed.
Navigating the Entire Channel List
Press “
” or “ ” button for selecting the
previous or next channel. You can press
“P+” or
“P-”
button to move page up or page down.
To watch a specifi c channel, highlight it using
“
” or “ ” button and then press “ OK” button,
while the “Select” item on Channel List menu is
highlighted by using “
” or “ ” button.
Then the name and number of the selected
channel will be displayed in the top-left and
top-right of the channel display at the top-right
of the screen, respectively.
Moving the channels in the channel list
• Press “
” or “ ” buttons to select the channel
that will be moved.
• Press “
” or “ ” buttons to select the “ Move ”
item on Channel List menu.
The following OSD will be displayed to indicate
that a channel number should be entered using
the numeric buttons.
Note: If you enter the programme number of the
channel that you want to move, “.... channel services
will be replaced. Do you want to continue?” OSD will
be displayed. Press OK to confi rm or select “No” to
cancel.
Deleting the Channels in the Channel List
• Press “ ” or “ ” button to select the channel
that will be deleted.
• Press “
” or “ ” button to select the “Delete’’
item on Channel List menu.