Operation Manual

English - 37 -
If Sleep Timer is activated, at the end of the
selected time, the TV goes automatically to
standby mode.
Child Lock
Press “
” or “ ” button to select Child Lock .
Use “
” or “ ” button to set the Child Lock On
or Off. When On is selected, the TV can only
be controlled by the remote control handset. In
this case the control panel buttons (except for
the STANDBY button) will not work.
Hence, if one of those buttons is pressed, Child
Lock On will be displayed on the screen when
the menu screen is not visible.
Language
Press “
” or “ ” button to select Language .
Use “
” or “ ” button to select the Language .
Default Zoom
While zoom mode is set as AUTO, the TV will
set the zoom mode in accordance with the
signal of the broadcast. If there is no WSS or
aspect ratio information, the TV will then use this
setting to adopt. Press “
” or “ ” button to select
Default Zoom. You can set Default Zoom to
Panoramic, 16:9, 4:3 or 14:9 by pressing “
” or “ ” button.
Blue Background
If the signal is weak or absent, the TV will
automatically change to a blue screen. To
enable this, set Blue Background to On .
By pressing “
” or “ ” button, select Blue
Background. Press “
” or “ ” button to set
Blue Background as On or Off .
Menu Timeout
To set a specific display timeout for menu
screens, set a value for this option.
Press “
” or “ ” button to select Menu Timeout .
Use “
” or “ ” button to change menu timeout
to 15 sec , 30 sec or 60 sec .
Teletext Language
Press “
” or “ ” button to select Teletext
Language. Use “
” or “ ” button to change
Teletext Language to West, East, Turk/Gre ,
Cyrillic, Arabic or
Persian. .
Antenna Power (optional)
When antenna power option is set as On, +5V
will be transmitted to the antenna output.
This feature enables the use of active
antennas.
Note: Antenna power should be “Off” when standard
antenna is used instead of the active antenna.
Ext Out
Press “ ” or “ ” button to select Ext Out. Use “
” or “ ” button to set the Ext Out as On or Off.
Note :
For copying from a DVD or VCR device, you should
choose desired source from source menu and turn
“On” to EXT Out from feature menu.
Install Menu
Program
Press “
” or “ ” button to select Program. Use
“
” or “ ” button to select the program number.
You can also enter a number using the numeric
buttons on the remote control. There are 200
programme storage between 0 and 199.
Band
Band can be selected either C or S. Press “
”
or “
” button to set Band.
Channel
Channel can be changed by “
” or “ ” button
or numeric buttons.
Colour System
Press “
” or “ ” button to select Colour System.
Use “
” or “ ” button to change the colour
system to
PAL,SECAM,PAL60,AUTO,NTSC
4,43 or NTSC 3,58.
Sound System
Press “
” or “ ” button to select Sound System.
Press “
” or “ ” button to change the sound
system to BG,DK, I, L or L’.