Operation Manual

27
English
(2) Trimmer Guide (Fig. 18
V
)
2. Model M8V(S), M8(S)
(1) Chuck Sleeve
(2) Trimmer Guide (Fig. 21
V
)
(3) Feed Screw Ass'y (Fig. 21
W
)
SPECIFICATIONS
*Be sure to check the nameplate on product as it is subject to change by areas.
STANDARD ACCESSORIES
1. Model M12V(S), M12SA(S)
(1) Straight Guide ........................................................... 1
(2) Bar Holder .................................................................. 1
Feed Screw ................................................................ 1
Wing Bolt ................................................................... 1
(3) Template Guide ......................................................... 1
(4) Wrench ....................................................................... 1
(5) Straight Bit (Tungsten Carbide) ............................... 1
(6) Chuck Sleeve ............................................................. 1
(7) Wing Bolt (A)
(M6 × 15, for mounting the guide bars)................... 2
(8) Lock Spring (for mounting the guide bars) ............. 2
NOTE
Based on the kind of collet chuck, 12 mm type or 1/2"
type, either straight bit and chuck sleeves are attached.
2. Model M8V(S), M8(S)
(1) Parallel Guide ............................................................ 1
(2) Template Guide ......................................................... 1
(3) Wrench ....................................................................... 1
(4) Wing Bolt (A)
(M6 × 15, for mounting the guide bars)................... 2
(5) Lock spring (for mounting the guide bars) ............. 2
Standard accessories are subject to change without notice.
OPTIONAL ACCESORIES - sold separately
1. Model M12V(S), M12SA(S)
(1) Chuck Sleeve
8 × 8 ............................1 12 mm Cellet Chuck
1/2" × 1/2" ...................1 1/2" Collet Chuck
8 mm ..........................1 12 mm Collet Chuck
1/4" .............................1 1/2" Collet Chuck
D d Shape of chuck sleeve
6 mm
12 mm
8 mm
No groove
1/4"
3/8"
1 groove
1/4"
1/2"
3/8"
2 groove
10 mm
No groove
Model M12V(S) M12SA(S) M8V(S) M8(S)
Voltage (by areas)* (110V, 115V, 120V, 127V, 220V, 230V, 240V)
Power Input* 1850 W 1600 W 800 W
Collet Chuck Capacity 12 mm or 1/2" 8 mm or 1/4"
No-load speed 8000—20000/min 22000/min 10000—25000/min 25000/min
Main Body Stroke 62 mm 50 mm
Weight (without cord and
standard accessories)
5.3 kg 5.2 kg 2.8 kg 2.7 kg
D d Shape of chuck sleeve
1/4"
8 mm
No groove
6 mm
1 groove
26 mm
20 mm
d
D
d
D