Operation Manual

GB
1. Press twice.
“dEF2” will be shown on the display.
2. Turn to select the defrosting time until “5:00” is shown on the display.
3. Press
once.
4. Repeatedly press
or turn to select the microwave power level
until “P80” is displayed.
5. Press
to confirm.
6. Turn to select the cooking time until “7:00” displays.
7. Press
to start cooking.
NOTE: After one cooking stage is finished, a beep sound is heard, indicating
the next cooking stage has begun.
Preset Function
1. Set the clock. (See ‘Setting the Clock’)
Defrost cannot be set as the cooking program.
Follow the steps 3 to 6 of “”Multi-stage Cooking”.
3. Press
4. Turn
to adjust hour digits, the input hour should be a 24-hour time
value.
5. Press
6. Turn
to adjust the minute digits.
7. Press to finish the setting.
8. When the preset time is reached, beeps will sound then the cooking will
start automatically.
Auto Menu
For the food in the following table, it is not necessary to program the cooking
power and time. Take the following steps:
1. In standby mode, turn
clockwise to select the desired menu from the
table below.
2. Press
to confirm.
3. Turn
to select the food weight.
2. Set a cooking program with up to two stages.
, the hour digits will flash.
, the minute digits will flash.
4. Press to start cooking.
“ ” will flash on the display.
15
Downloaded from www.vandenborre.be