user manual

3.1.2
3 - 3
(2) Windows will start up and request to key in Ctrl + Alt + Delete will appear. Press Ctrl + Alt
+ Delete simultaneously (This request message will be shown or not depending on network
setting of SEM computer). The logon dialog window will appear. Enter user name and
password. The Windows XP will start. The following initial settings are made when the
instrument is shipped from the factory.
User name: S-3400
Password: None
Reference: 2.3.1 Starting the PC and Logging in the S-3400 Program
NOTICE: When the system is delivered, the password for the Administrator account is set to
hitachi.
(3) The S-3400N system will start up automatically and the initial log-in dialog window appears.
The initial control program log-in name and password are shown below.
Log-in name : S-3400
Password : None
Fig. 3.1-3 Log-in Window
Input login name and password, then click OK. The SEM main window will open.
Refer to <3.9.15 Password Setting> and <3.9.16 Setting Login Name>.