user manual

2.3 Graphical User Interface (GUI)
2 - 36
2.3.6.9 Stage Control
（With Type II 5-axis motor-drive stage）
Fig. 2.3-22 Stage Control
(1) HOME Z10 button
Moves the stage to the Exchange Position (X＝60 mm, Y＝25 mm, R＝0°, T＝0°, Z＝10
mm). If the stage is in the Exchange position (the Z-axis at 10 mm), the display window on
the left side of the button is in blue.
(2) HOME Z65 button
Moves the stage to the Exchange Position (X＝60 mm, Y＝25 mm, R＝0°, T＝0°, Z＝65
mm). If the stage is in the Exchange position (the Z-axis at 65 mm), the display window on
the left side of the button is in blue.
(3) !STOP button
Use this button to stop stage movement when, for example, it has been started with
incorrect stage coordinate value.