User Manual

Chapter 8 Communication Functions
8 - 35
(5) Registers (group C)
Register
No.
Function name
Function
code
R/W Monitoring and setting items
Data
resolution
1401h Input [1] function C001 R/W
0 (Forward Run), 1 (RV: Reverse RUN),
2 (CF1: Multispeed 1 setting), 3 (CF2:
Multispeed 2 setting), 4 (CF3:
Multispeed 3 setting), 6 (JG: Jogging),
7 (DB: external DC braking), 8 (SET:
Set 2nd motor data), 9 (2CH: 2-stage
acceleration/deceleration), 11 (FRS:
free-run stop), 12 (EXT: external trip),
13 (USP: unattended start protection),
15 (SFT: software lock), 18 (RS: reset),
20 (STA: starting by 3-wire input), 21
(STP: stopping by 3-wire input), 22
(F/R: forward/reverse switching by
3-wire input), 23 (PID: PID disable), 24
(PIDC: PID reset, 27 (UP: remote
control UP function), 28 (DWN: remote
control DOWN function), 29 (UDC:
remote control data clearing), 31 (OPE:
forcible operation), 32 (SF1: multispeed
bit 1), 33 (SF2: multispeed bit 2), 34
(SF3: multispeed bit 3), 39 (OLR:
overload restriction selection), 50
(ADD: trigger for frequency addition
[A145]), 51 (F-TM: forcible-terminal
operation), 53 (KHC: cumulative power
clearance), 65 (AHD: analog command
holding), 83 (HLD: retain output
frequency), 84 (ROK: permission of run
command), 86 (DISP: Display
limitation),
255 (no: no assignment),
-
1402h Input [2] function C002 R/W -
1403h Input [3] function C003 R/W -
1404h Input [4] function C004 R/W -
1405h Input [5] function C005 R/W -
1406h to
140Ah
(Reserved) - - Inaccessible -
140Bh Input [1] active state C011 R/W 0 (NO), 1 (NC) -
140Ch Input [2] active state C012 R/W 0 (NO), 1 (NC) -
140Dh Input [3] active state C013 R/W 0 (NO), 1 (NC) -
140Eh Input [4] active state C014 R/W 0 (NO), 1 (NC) -
140Fh Input [5] active state C015 R/W 0 (NO), 1 (NC) -
1410h to
1414h
(Reserved) - - Inaccessible -