User Manual
Chapter 13 Option
13 - 13
“b” Function
Run
Mode
Edit
Default
s
Func.
Code
Name Description
Initial dat
a
standard
200/400
Initial dat
a
CHN
200/400
Initial dat
a
EU
200/400
Units
b022
Overload
restriction
level
Sets the level of overload restriction, between
20% and 200% of the rated current of the
inverter, setting resolution is 1% of rated current
Rated
current
x 1.50
← ←
A
b222
Overload
restriction
level,
2
nd
motor
Rated
current
x 1.50
← ←
A
b023
Decelerat
ion rate at
overload
restriction
Sets the deceleration rate when inverter detects
overload, range is 0.1 to 3000.0, resolution 0.1
seconds.
1.0
← ←
s
b223
Decelerat
ion rate at
overload
restriction
, 2
nd
motor
1.0
← ←
s
b024
Overload
restriction
operation
mode 2
Select the operation mode during overload
conditions, three options, option codes:
00Disabled
01Enabled for acceleration and constant
speed
02Enabled for constant speed only
01
← ←
b025
Overload
restriction
level 2
Sets the level of overload restriction, between
20% and 200% of the rated current of the
inverter, setting resolution is 1% of rated current
Rated
current
x 1.50
← ←
A
b026
Decelerat
ion rate 2
at
overload
restriction
Sets the deceleration rate when inverter detects
overload, range is 0.1 to 3000.0, resolution 0.1
seconds.
1.0
← ←
s
b027
OC
suppressi
on
selection
*
Two option codes:
00Disabled
01Enabled
01
← ←
b028
Current
level of
active
freq.
matching
Sets the current level of active freq. matching
restart, range is 0.2*inverter rated current to
2.0*inverter rated current, resolution 0.1
seconds.
Rated
current
← ←
A
b029
Decelerat
ion rate of
active
freq.
matching
Sets the deceleration rate when active freq.
matching restart, range is 0.1 to 3000.0,
resolution 0.1 seconds.
0.5
← ←
s
b030
Start freq.
of active
freq.
matching
Three option codes:
00freq at previous shutoff
01start from max. Hz
02start from set frequency
00
← ←