User Manual

Chapter 13 Option
13 - 29
“A” Function
Run
Mode
Edit
Defaults
Func.
Code
(WOP)
Name Description
Initial dat
a
standard
200/400
Initial dat
a
CHN
200/400
Initial dat
a
EU
200/400
Units
A045
(V/F gain)
V/f gain
Sets voltage gain of
the inverter, range is
20 to 100%

100.
← ←
%
A245
(V/F gain-M2)
V/f gain, 2
nd
motor

100.
← ←
%
A046
(A.TQ-BST V
gain)
Voltage compensation
gain for automatic
torque boost
Sets voltage
compensation gain
under automatic
torque boost, range
is 0 to 255

100.
← ←

A246
(A.TQ-BST V
gain-M2)
Voltage compensation
gain for automatic
torque boost, 2
nd
motor

100.
← ←

A047
(A.TQ-BST SL
gain)
Slip compensation gain
for automatic torque
boost
Sets slip
compensation gain
under automatic
torque boost, range
is 0 to 255

100.
← ←

A247
(A.TQ-BST SL
gain-M2)
Slip compensation gain
for automatic torque
boost, 2
nd
motor

100.
← ←

A051
(DB enable)
DC braking enable
Three options;
select codes:
00Disable
01Enable during
stop
02Frequency
detection

00
← ←

A052
(DB
Frequency)
DC braking frequency
The frequency at
which DC braking
begins,
range is 0.00to
60.00Hz

0.50
← ←
Hz
A053
(DB wait time)
DC braking wait time
The delay from the
end of controlled
deceleration to start
of DC braking
(motor free runs
until DC braking
begins),
range is 0.0 to 5.0
seconds.

0.0
← ←
s
A054
(DB force)
DC braking force for
deceleration
Level of DC braking
force, settable from
0 to 100%

50.
← ←
%
A055
(DB decel
time)
DC braking time for
deceleration
Sets the duration for
DC braking, range is
from 0.0 to 10.0
seconds.

0.5
← ←
s
A056
(DB input
select)
DC braking / edge or
level detection for [DB]
input
Two options; select
codes:
00Edge detection
01Level detection

01
← ←

A057
(DB force
start)
DC braking force at
start
Level of DC braking
force at start,
settable from 0 to
100%

0.
← ←
%