User Manual

ManualsBrandsHitachi ManualsAutomationFrequency Inverter

Chapter 6 Operation

6 - 9

[Setting example]

After power ON, changing from . display to change the  (carrier frequency) data.

Note1) Function code xxx are for monitor and not possible to change.

Function codes xxx other than  are reflected on the performance just after changing the data (before

pressing SET key), and there will be no blinking.

Note2) Keep pressing for more than 1 second leads to d001 display, regardless the display situation. But note that the

display will circulates while keep pressing the [ESC] key because of the original function of the key.

(e.g.         … displays . after 1 second)

When a function code is shown… When a data is shown…

ESC key

Move on to the next function group

Cancels the change and

moves back to the function

code

SET key Move on to the data display

Fix and sets the data and

moves back to the function

code

 key Increase function code Increase data value

 key

Decrease function code Decrease data value







.

Display is solid lighting.

.







.



1) Data of  will be shown on the display

after the first power ON

2) Press [ESC] key to show

the function code

3) Press [ESC] key to move on to the function group 

4) Press [ESC] key twice to move on to the function group .

5) Press Up key to change increase function code (  )

6) Press SET key to display the data of 

 Press up key to increase the

data (.  .)

7) Press SET key to set

and save the data

When data is changed, the display starts

blinking, which means that new data has not

been activated yet.

ESC





SET

ESC

SET

ESC





:Fix and sets the data and moves back to the function code

:Cancels the change and moves back to the function code

SET

ESC

SET

ESC SET

△

▽

RUN STOP

osition