User Manual

Chapter 13 Option
13 - 40
“b” Function
Run
Mode
Edit
Default
s
Func.
Code
(WOP)
Name Description
Initial dat
a
standard
200/400
Initial dat
a
CHN
200/400
Initial dat
a
EU
200/400
Uni
t
s
b036
(Reduced V
start)
Reduced voltage
start selection
Set range, 0 (disabling
the function), 1 (approx.
4ms) to 250 (approx. 1s)

3
← ←

b037
(Display
restriction)
Function code
display restriction
Five option codes:
00Full display
01Function-specific
display
03Data comparison
display
04Basic display
05Monitor display only

00
← ←

b038
(Initial
display)
Initial display
selection
000

Func. code that
SET key pressed last
displayed.(*)
001~060d001~d060
displayed
201F001displayed
202B display of LCD
operator (In case of
Digital operator, same
000setting)

001
← ←

b050
(Ctrld
decel.select)
Controlled
deceleration on
power loss
Four option codes:
00Disabled
01Decelerates to a stop
02Decelerates to a stop
with DC bus voltage
controlled
03Decelerates to a stop
with DC bus voltage
controlled, then restart

00
← ←

b051
(DC Volt
ctrld.decel)
DC bus voltage
trigger level of ctrl.
decel.
Setting of DC bus voltage
to start controlled decel.
operation. Range is 0.0 to
400.0/800.0

220.0/
440.0
← ←
V
b052
(OV lvl
ctrld.decel)
Over-voltage
threshold of ctrl.
decel.
Setting the OV-LAD stop
level of controlled decel.
operation. Range is 0.0 to
400.0/800.0

360.0/
720.0
← ←
V
b053
(Decel time
ctrld.dec)
Deceleration time of
ctrl. decel.
Range is 0.01 to 300.00
seconds.

1.00
← ←
s
b054
(FQ drop
ctrld.decel)
Initial freq. drop of
ctrl. decel.
Setting of initial freq.
drop.
Range is 0.00 to 10.00 Hz

0.00
← ←
Hz
b060
(Windw comp
[O/OI] max)
Maximum-limit level
of window
comparator (O/OI)
Set range, {Min.-limit level
(b061) + hysteresis width
(b062)x2} to 100 %

100.
← ←
%
b061
(Windw comp
[O/OI] min)
Minimum-limit level
of window
comparator (O/OI)
Set range, 0 to {Max.-limit
level (b060) - hysteresis
width (b062)x2}maximum
of 100 %

0.
← ←
%
b062
(Windw comp
[O/OI] hys)
Hysteresis width of
window comparator
(O/OI)
Set range, 0 to {Max.-limit
level (b060) - Min.-limit
level (b061)}/2 %
(Maximum of 10%)

0.
← ←
%