User Manual

Chapter 13 Option
13 - 55
“H” Function
Ru
n
Mo
d
e
Edi
t
Defaults
Func.
Code
(WOP)
Name Description
Initial dat
a
standard
200/400
Initial dat
a
CHN
200/400
Initial dat
a
EU
200/400
Unit
s
H003
(Motor capacity)
Motor capacity
Twelve selections:
0.10/0.20/0.40/0.5
5/0.75/1.10/1.50/2
.20/3.00/3.70/4.00
/5.50

Specifie
d by the
capacity
of each
inverter
model
← ←
kW
H203
(Motor
capacity-M2)
Motor capacity,
2
nd
motor

← ←
kW
H004
(Motor poles)
Motor poles setting
Five selections:
2 / 4 / 6 / 8

4
← ←
pole
s
H204
(Motor poles-M2)
Motor poles setting,
2
nd
motor

4
← ←
pole
s
H006
(M.stabil.const)
Motor stabilization
constant
Motor constant
(factory set),
range is 0 to 255

100.
← ←

H206
(M.stabil.
const-M2)
Motor stabilization
constant, 2
nd
motor

100.
← ←

13.2 Top cover for exclusive use of NE-S1series：NES1-FFM-M
・Prepared exclusive top cover NES1-FFM-M (Afterward FFM) to improve usability of the inverter.
The applicable models are as follows. There are respective effects.
① Effect to improve derating properties
② Effect to improve Capacitor life
③ Effect not to let dust invade it from the upper part
④ Effect to reduce an installation area at the time of plural mount installation
Applicable model：NES1-015～022SB/LB,007～040HB
Note) Please do not be attached to the inverter which is not an applicable model. There might be an
injury, the fire. In addition, cause the inverter discarding.
13.2.1 Mounting method
・Because mounting method varies according to inverter, please be careful.
① NES1-015～022SB/LB,022HB,040HB ②NES1-015HB ③NES1-007HB
When the inverter which I purchased is included in ①, fit FFM in the cover upper surface of the main
body of inverter, and, please use it.
When the inverter which I purchased is included in ②, After having removed (shaded area) surgically in
nippers for back side tang of FFM of figure 2, fit FFM in the cover upper surface of the main body of
inverter, and, please use it.
When the inverter which I purchased is included in ③, After having removed (shaded area) surgically in
nippers for back side tang of FFM of figure 2 and 3, fit FFM in the cover upper surface of the main body of
inverter, and, please use it.