User Manual

Contents
ii
Chapter 7 Explanation of Functions
7.1 Monitoring the data ······························································································ 7 - 1
7.1.1 Output frequency monitoring (d001) ······························································ 7 - 1
7.1.2 Output current monitoring (d002) ·································································· 7 - 1
7.1.3 Rotation direction monitoring (d003) ······························································ 7 - 1
7.1.4 Process variable (PV), PID feedback monitoring (d004,A071,A075) ····················· 7 - 1
7.1.5 Intelligent input terminal status (d005) ··························································· 7 - 2
7.1.6 Intelligent output terminal status (d006)·························································· 7 - 2
7.1.7 Scaled output frequency monitoring (d007,b086) ············································· 7 - 2
7.1.8 Output voltage monitoring (d013) ································································· 7 - 3
7.1.9 Input power monitoring (d014) ····································································· 7 - 3
7.1.10 Cumulative power monitoring (d015,b078,b079) ·············································· 7 - 3
7.1.11 Cumulative operation RUN time monitoring (d016) ··········································· 7 - 3
7.1.12 Cumulative power-on time monitoring (d017) ·················································· 7 - 3
7.1.13 Heat sink temperature monitoring (d018) ······················································· 7 - 3
7.1.14 Dual monitoring (d050,b160,b161) ································································ 7 - 4
7.1.15 Trip Counter (d080) ··················································································· 7 - 4
7.1.16 Trip monitoring 1 to 6 (d081 to d086) ····························································· 7 - 4
7.1.17 Warning monitoring (d090) ·········································································· 7 - 5
7.1.18 DC voltage monitoring (d102) ······································································ 7 - 5
7.1.19 Electronic thermal overload monitoring (d104) ················································· 7 - 5
7.2 Using the basic functions ······················································································· 7 - 6
7.2.1 Frequency source setting and Output frequency setting
(F001,A001,A020/A220,C001 to C005)························································ 7 - 6
7.2.2 Run command source setting (A002/A202,C001 to C005,F004) ·························· 7 - 7
7.2.3 Keypad Run key routing (F004) ···································································· 7 - 7
7.2.4 Rotational direction restriction (b035) ···························································· 7 - 7
7.2.5 Stop mode selection (b091,F003/F203,b003,b007,b008) ··································· 7 - 8
7.2.6 Acceleration/deceleration time setting
(F002/F202, F003/F203, A004/A204, C001 to C005) ········································ 7 - 8
7.2.7 Base frequency setting (A003/A203, A082/A282) ············································· 7 - 9
7.2.8 Using the AVR Functions (A081/A281, A082/A282, A083, A084) ························· 7 - 9
7.2.9 Maximum frequency setting (A004/A204) ······················································· 7 - 11
7.2.10 Carrier frequency setting (b083) ··································································· 7 - 11
7.3 Setting the intelligent I/O terminal function ································································· 7 - 12
7.3.1 Intelligent input terminal setting (C001 to C005) ··············································· 7 - 12
7.3.2 Input terminal a/b (NO/NC) selection (C011 to C015) ········································ 7 - 12
7.3.3 Input terminal response time (C160 to C164) ·················································· 7 - 13
7.3.4 Intelligent output terminal setting (C021,C026) ················································ 7 - 13
7.3.5 Intelligent output terminal a/b (NO/NC) selection (C031,C036) ···························· 7 - 14
7.3.6 Output signal delay/hold function (C130,C131,C140,C141) ································ 7 - 15
7.4 Using the analog terminal ······················································································ 7 - 16
7.4.1 Analog input (O/OI) ·················································································· 7 - 16
7.4.2 External analog input (O/OI) filter setting (A016) ·············································· 7 - 16
7.4.3 Analog command holding function (AHD) (C101,C001 to C005) ·························· 7 - 17
7.4.4 Analog Input Adjustment (C081) ··································································· 7 - 17
7.4.5 Start/end frequency setting for external analog input (A011 to A015) ···················· 7 - 18
7.4.6 FM terminal (C027,C030,C105,b081) ···························································· 7 - 19