Brochure

ManualsBrandsHitachi ManualsAutomationFrequency Inverter

Function List

b Group: Fine-tuning Functions

: Allowed

[

: Not allowed

]

Function Code Name Range Default Unit

Run mode edit

Lo Hi

Electronic

thermal

b012 Electronic thermal setting

0.20 × Rated current to 1.00 × Rated current

Rated current

b212 Electronic thermal setting, 2nd motor

Rated current

b013 Electronic thermal characteristic

00 (reduced-torque characteristic)/ 01 (constant-torque characteristic)/ 02 (free setting)

b213 Electronic thermal characteristic, 2nd motor 01

b015 Free setting, electronic thermal frequency (1) 0 to Free setting, electronic thermal frequency (2) 0. Hz

b016 Free setting electronic thermal ~current1 0.00 to inverter rated current Amps 0.0 A

b017 Free setting, electronic thermal frequency (2)

Free setting, electronic thermal frequency (1) to Free setting, electronic thermal

frequency (3)

0. Hz

b018 Free setting electronic thermal ~current2 0.00 to inverter rated current Amps 0.0 A

b019 Free setting electronic thermal ~freq.3 Free setting, electronic thermal frequency (2) to 400.0 0. Hz

b020 Free setting electronic thermal ~current3 0.00 to inverter rated current Amps 0.0 A

Overload

restriction

b021 Overload restriction operation mode

00(Disable)/01(Enable)/02(Enable for during acceleration)

b221

Overload restriction operation mode, 2nd motor

b022 Overload restriction setting

0.20 × Rated current to 2.00 × Rated current

150% of

Rated

current

b222 Overload restriction setting, 2nd motor A

b023 Deceleration rate at overload restriction

0.1 to 999.9/1000. to 3000.

1.0 s

b223

Deceleration rate at overload restriction, 2nd motor

1.0 s

b024 Overload restriction operation mode 2

00 (disabling)/ 01 (enabling during acceleration and constant-speed operation)/

02 (enabling during constant-speed operation)

b025 Overload restriction level 2 setting 0.20 × rated current to 2.00×rated current

150% of Rated current

b026 Deceleration rate 2 at overload restriction 0.1 to 999.9/1000. to 3000. 1.0 s

b027 OC suppression selection 00 (OFF)/ 01 (ON) 01

b028

Current level of active freq. matching restart setting

0.20 × rated current to 2.00 × rated current

Rated current

b029 Deceleration rate of active freq. matching 0.1 to 999.9/1000. to 3000. 0.5 s

b030

Start freq to be used in case of active freq. Matching restart

00 (frequency at the last shutoff)/ 01 (maximum frequency)/ 02 (set frequency) 00

Lock b031 Software lock mode selection

00([SFT] input blocks all edits)/01([SFT] input blocks edits except F001 and Multispeed

parameters/02(No access to edits)/03(No access to edits except F001 and Multi-speed

parameters)/10(High-level access,including b031)

Others

b034 Run/power ON warning time

0. (Disabling the signal output) /1. to 9999. in units of 10 hours

1000 to 6553 in units of 100 hours

0. Hrs

b035 Rotation direction restriction 00( Enable for both dir)/ 01 (Enable for forward only)/ 02 (Enable for reverse only) 00

X X

b036 Reduced voltage start selection 0 (minimum reduced voltage start time) to 255 (maximum reduced voltage start time) 3

b037 Function code display restriction

0 (full display), 1 (function-specific display) , 3 (data comparison display),

4 (basicdisplay), 5(monitor display)

b038 Initial display selection

000(Func. code that SET key pressed last displayed.) /

001 to 060(d001 to d060 displayed) / 201(F001displayed) /

202(B display of LCD operator (In case of Digital operator, same 000 setting)

001

b050 Selection of the non stop operation

00(Disabled)/ 01 (enabling)/ 02 (nonstop operation at momentary power failure

(no restoration))/03 (nonstop operation at momentary power failure (restoration to be done))

X X

b051 DC bus voltage trigger level of ctrl. decel. 200V class:0.0 to 400.0, 400V class:0.0 to 800.0

220.0/440.0

X X

b052

Over-voltage threshold of ctrl. decel.

200V class:0.0 to 400.0, 400V class:0.0 to 800.0

360.0/720.0

X X

b053

Deceleration time of ctrl. decel.

0.01 to 300.0 1.00 s

X X

b054 Frequency width of quick deceleration setting 0.00 to 10.00 0.00 Hz

X X

b060 Maximum-limit level of window comparators 0 to 100 100. %

b061 Minimum-limit level of window comparators 0 to 100 0. %

b062 Hysteresis width of window comparators 0 to 10 0. %

b070 Operation level at O/OI disconnection 0. to 100., or “no” (ignore) no

b078 Watt-hour clearance 00(OFF)/01(CLR)(press STR then clear) 00

b079 Watt-hour display gain 1.to1000. 1.

b082 Start frequency adjustment 0.01 to 9.99 0.50 Hz

b083 Carrier frequency setting 2.0 to 15.0 *1 2.0 kHz

b084

Initialization mode

(parameters or trip history)

00(disabling)/ 01 (clearing the trip history)/ 02 (initializing the data)/

03 (clearing the trip history and initializing the data)

X X

b085 Country code for initialization 00 (Mode1)/ 01(Mode2) 00

X X

b086 Frequency scaling conversion factor 0.01 to 99.99 1.00

b087 STOP key enable 00:ON(Enable)/01:OFF(Disable)/02:Only RESET(Disable for stop) 00

b088 Restart mode after FRS 00(Restart from 0Hz)/01(Restart with frequency detection) 00

b089 Automatic carrier frequency reduction

00(disabling)/ 01(enabling( output current controlled))/

02(enabling( fin temperature controlled))

X X

b091 Stop mode selection 00(Deceleration and stop)/01(Free-run stop) 00

b094 Initialization target data setting 00(All parameters)/01(All parameters except in/output terminals and communication) 00

X X

b100 Free-setting V/F freq. (1) 0. to b102 0. Hz

X X

b101 Free-setting V/F volt. (1) 200V class:0.0 to 300.0, 400V class:0.0 to 600.0 0.0 V

X X

b102 Free-setting V/F freq. (2) b100 to b104 0. Hz

X X

b103 Free-setting V/F volt. (2) 200V class:0.0 to 300.0, 400V class:0.0 to 600.0 0.0 V

X X

b104 Free-setting V/F freq. (3) b102 to b106 0. Hz

X X

b105 Free-setting V/F volt. (3) 200V class:0.0 to 300.0, 400V class:0.0 to 600.0 0.0 V

X X

b106 Free-setting V/F freq. (4) b104 to b108 0. Hz

X X

b107 Free-setting V/F volt. (4) 200V class:0.0 to 300.0, 400V class:0.0 to 600.0 0.0 V

X X

b108 Free-setting V/F freq. (5) b106 to b110 0.0 Hz

X X

b109 Free-setting V/F volt. (5) 200V class:0.0 to 300.0, 400V class:0.0 to 600.0 0 V

X X

b110 Free-setting V/F freq. (6) b108 to b112 0. Hz

X X

b111 Free-setting V/F volt. (6) 200V class:0.0 to 300.0, 400V class:0.0 to 600.0 0.0 V

X X

b112 Free-setting V/F freq. (7) b110 to 400 0. Hz

X X

b113 Free-setting V/F volt. (7) 200V class:0.0 to 300.0, 400V class:0.0 to 600.0 0.0 V

X X

b130 Over-voltage LADSTOP enable 00 (OFF)/ 01 (V-count)/ 02 (Accel)/ 03(Acc/Dcc) 00

b131 Decel. overvolt. suppress level 200V class:330. to 390. , 400V class:660. to 780. 360/720 V

b132 DC bus AVR constant setting 0.10 to 30.00 1.00 s

b133 DC bus AVR for decel. Proportional-gain 0.00 to 5.00 0.20

b134 DC bus AVR for decel. Integral-time 0.0 to 150.0 1.0 s

b150 Panel Display selection 001 to 050 001

b160 1st data of d050 001 to 018 001

b161 2nd parameter of Double Monitor 001 to 018 002

b163 Data change mode selection of d001 and d007 00 (OFF)/ 01 (ON) 01

b164 Automatic return to the initial display 00 (OFF)/ 01 (ON) 00

b165 Ex. operator com. loss action

00 (trip)/01 (trip after deceleration to a stop)/02 (Ignore)/03 (coasting (FRS))/

04 (decelerates to a stop)

b166 Data Read/Write select 00 (Read/Write OK)/01 (Protected) 00

b180 Initialization trigger 00 (initialization disable)/01 (perform initialization) 00

Note 1:

Carrier derating required for aambient temperature higher than 40℃(022SB:temperature higher than 30℃), no freezing.

When attach option FFM, in 015/022SB the derating becomes needless.