Specification

PART
S
NR 90GR2
DESCRIPTION REMARKS
50 886-242 BELLEVILLE SPRING M4 4
51 886-546 PUSHING LEVER ARM (C) 1
52 886-245 PUSHING LEVER SPRING (A) 2
53 885-301 PUSHING LEVER CONNECTOR 1
54 885-625 CYLINDER PLATE (A) 1
55 980-046 SEAL LOCK HEX. SOCKET HD. BOLT M5X10 2
56 956-329 U-NUT M4 2
57 886-547 PUSHING LEVER ARM (D) 1
58 949-819 HEX. SOCKET HD. BOLT M5X10 (10 PCS.) 1
62 886-128 PUSHING STOPPER 1
63 886-144 PUSHING LEVER (A) 1
64 885-272 ADJUSTER BUSH (A) 1
65 NAME PLATE 1
66 885-304 SCREW M5 4
67 886-134 HOUSING 1
68 885-307 INSULATOR SHEET 1
69 328-922 HITACHI PLATE 1
70 886-244 HOUSING ASS'Y 1 INCLUD. 66-68
71 876-465 NYLON NUT M4 1
72 949-820 HEX. SOCKET HD. BOLT M5X15 (10 PCS.) 1
73 878-164 SLEEVE 1
74 302-086
TAPPING SCREW (W/FLANGE) D4X20 (BLACK) 5
75 886-139 HANDLE (D) 1
* 76 CAUTION LABEL 1 FOR EUROPE
77 WARNING LABEL 1
78 301-815 TAPPING SCREW (W/FLANGE) D4X45 1
79 885-334 SWITCH MOUNT 1
80 885-347 SWITCH ARM 1
81 885-628 PRISM (B) 1
82 885-337 LOCK BAR SPRING 1
83 885-339 WIRING COVER 1
84 885-346 FLAT HD. TAPPING SCREW D4 1
* 85 885-331 CONTROLLER 1
* 85 885-595 CONTROLLER 1 FOR USA, CAN
86 309-933
TAPPING SCREW (W/FLANGE) D4X14 (BLACK) 4
87 885-828 TRIGGER SPRING (A) 1
88 885-340 CHAMBER LOCK BAR 1
89 949-551 ROLL PIN D2.5X10 (10 PCS.) 1
90 885-799 TRIGGER INTERNAL WIRE (C) SET 1 INCLUD. 89
96 877-371 NYLON NUT M5 1
97 885-629 NAIL RAIL (A) 1
98 885-630 MAGAZINE PLATE (A) 1
99 886-141 CELL LEVER (A) 1
100 885-280 LATCH 1
101 949-859 ROLL PIN D2X8 (10 PCS.) 2
102 885-281 SPRING D3.6 1
103 885-352 CELL COVER 1
104 886-131 CELL RUBBER (A) 1
* 105 324-148 BATTERY EB 714S (EUROPE, AUS, NZL) 2
* 105 325-292 BATTERY EB 714S (USA, CAN/CLAMSHELL) 2
2 - 08 - 3 -
*ALTERNATIVE PARTS
NO.
USED
CODE NO.
ITEM
NO.