Operation Manual

7
English
SPECIFICATIONS
1. Cordless Finish Nailer
Model NT1865DBAL NT1865DBSL
Motor DC Brushless DC Brushless
Applicable Nail 15 Ga 16 Ga
Applicable Nail Length 32 mm to 65 mm 25 mm to 65 mm
Nail Loading capacity [nails] 100 (1 strip) 100 (2 strips)
Firing mode Full sequential / Contact (Selectable) Full sequential / Contact (Selectable)
Cycle rate [nails/second] 3 (Intermittent) 3 (Intermittent)
Battery Model BSL1830C BSL1830C BSL1850
Type Li-ion battery
Voltage DC 18V
Weight* 3.5 kg 3.4 kg 3.6 kg
Dimension
Height × Length × Width
344 mm × 300 mm × 104 mm
315 mm × 298 mm
× 104 mm
315 mm × 310 mm
× 104 mm
* Weight: According to EPTA-Procedure 01/2003
2. Cordless Brad Nailer
Model NT1850DBSL
Motor DC Brushless
Applicable Nail 18 Ga
Applicable Nail Length 16mm to 50mm
Nail Loading capacity [nails] 100 (1 strip)
Firing mode Full sequential / Contact (Selectable)
Cycle rate [nails/second] 3 (Intermittent)
Battery Model BSL1830C BSL1850
Type Li-ion battery
Voltage DC 18V
Weight* 3.3 kg 3.6 kg
Dimension
Height × Length × Width
323 mm × 298 mm
× 104 mm
323 mm × 310 mm
× 104 mm
* Weight: According to EPTA-Procedure 01/2003
3. Battery Charger
Model UC18YFSL UC18YML2
Charging voltage DC 14.4 – 18 V
Weight 0.5 kg 0.7 kg
NOTE
Due to HITACHI’s continuing program of research and development, the specifi cations herein are subject to change
without prior notice.
0000Book_NT1865DBAL.indb 70000Book_NT1865DBAL.indb 7 2017/04/14 15:11:302017/04/14 15:11:30