Operation Manual

8
English
Type of lubricant Name of lubricant
Recommended oil SHELL TONNA
Motor oil SAE 10W, SAE 20W
Turbine oil ISO VG32 ~ 68
(#90 ~ #180)
Noise Information
Noise characteristic values in accordance with Dr prEN
792-13, JUNE, 1997:
The typical A-weighted single-event sound power level
L
WA,1s,d = 91 dB
The typical A-weighted single-event emission sound
pressure level at work station L
pA,1s,d = 84 dB.
These values are tool-related characteristic values and
do not represent the noise development at the point of
use. Noise development at the point of use will for
example depend on the working environment, the
workpiece, the workpiece support and the number of
driving operations, etc.
Depending on the conditions at the workplace and the
form of the workpiece, individual noise attenuation meas-
ures may need to be carried out, such as placing workpieces
on sound-damping supports, preventing workpiece vi-
bration by means of clamping or covering, adjusting to
the minimum air pressure required for the operation
involved,etc.
In special cases it is necessary to wear hearing protection
equipment.
Vibration Information
The typical vibration characteristic value in accordance
with Dr prEN 792-13, JUNE,1997 does not exceed 2.5 m/s
2
.
OILER-FILTER-REDUCING VALVE (Air Set)
So that the equipment can be operated under an optimum
condition to ensure extended service life, it is advisable to
use an oiler filter reducing valve. Please limit the length of
the hose between the nailer and the air set to within 10m
when using.
Fig. 20
APPLICABLE LUBRICANTS
This values is a tool-related characteristic value and does
not represent the influence to the hand-arm-system
when using the tool. An influence to the hand-arm-
system when using the tool will for example depend on
the gripping force, the contact pressure force, the work-
ing direction, the adjustment of energy supply, the
workpiece, the workpiece support.
Filter
Oiler
Reducing Valve
➡
Compressor
Side
➡
Nailer
Side