Operation Manual

25
ENGLISH
BASIC OPERATION (continued)
Input Switching to DTT/TV/AV1~5/HDMI1~2
There are several ways to change the input mode as mentioned below.
Please select your preferred way.
z You can select DTT and TV mode directly.
Press button on the remote control. Each time the button is pressed,
the mode is switched between DTT and TV mode.
z Display Input Switching Banner to select the input mode.
1. Press
button on the remote control or Input Select button on
the control panel to display Input Switching Banner.
2. Select the input mode.
Each time button on the remote control or Input Select button
on the control panel is pressed, the screen displays the
corresponding mode by following order.
DTT AV1 AV2 AV3TV
HDMI 1 AV5 AV4HDMI 2
Also, you can change the input mode back and forth by using
◄►
button on the remote control or Volume Up/Down button on the
control panel.
z Input Mode buttons (AV1~AV5 and HDMI 1~2 mode)
After pressing
button, press the desired Input Mode button on the
remote control.
Input Select button
Recall button
ABTV 10
Spanish
English
30 Min.
01h 59m
17
:
45
30 Min.
01h 59m
17
:
45
ABTV 1
30 Min.
01h 59m
17
:
45
AV1
Component
AV
VIDEO
Channel name and number
DTT
TV
Audio language
*1
Subtitle language (DVB)
*1
Off-timer
On-timer
Current time
*2
Channel name and TV position
Off-timer
On-timer
Current time
*2
Input mode
Signal mode
Off-timer
On-timer
Current time
*2
*1 If the programme provides audio / subtitle (DVB) service for the visually impaired or the hearing impaired, the icon or will appear.
*2 Only when time signal is received from DTT broadcasting, the current time is displayed.
Input
AV1
AV1
Composite
AV
Input Select button
Volume Down button
Volume Up button
Audio A2/NICAM mode
Input Mode
button
Input Signal Screen Display
The input signal status can be displayed on the screen by pressing the
+
button
of
the remote control.
After programme the input signal screen in DTT mode, you can show the information
banner by pressing
+
button again. Refer to
46
about the information banner.
The display will go out in approximately 6 seconds.