Operation Manual

33
ENGLISH
MAIN MENU OPERATION (continued)
Picture Menu (continued)
Selected Items Setup hint
Film Mode*
Off
On: Automatically identify if it is the movie fi lm and
faithfully reproduces the original fi lm images.
Off: Set to Off if the image does not look natural.
On
3D Comb Filter*
Off
This is available only when receiving NTSC/PAL
composite signal. This reduces the dot and colour blurring
in minute scales so that it can reproduce purer colour.
Low
High
LTI*
Off
Adjusts the sharpness of the picture signals.
Low
Middle
High
CTI*
Off
Adjusts the sharpness of the colour signals.
Low
Middle
High
Auto Colour*
Off
This monitors and adjusts the colour to maintain constant
colour levels. It also maintains natural tones whilst
preserving fi delity of background colours. This is available
only when receiving an NTSC composite and S-Video
signal.
On
Black Enhancement*
Off
Adjusts the black level compensation.
Low
Middle
High
MPEG NR*
Off
This is a noise reduction system for MPEG picture signal.
(ex. against mosquito noise and block noise.)
Low
High
Reset
Each item on this menu screen can be restored to the
original factory settings by pressing
OK
button.
Magenta
On: Turn On to adjust the balance of each colours
depending on the user’s preference. The settings
refl ect in each of the 4 Colour Temperature modes.
Reset: Each item on “Colour Management” can be
restored to the original factory setting.
Off: Remains as default setting.
Red
On
Yellow
Colour Management* Green
Cyan
Blue
Off
Drive
On: When you want to set specifi c adjustments in each of
the 4 Colour Temperature modes. You can adjust on
the Drive and Cutoff. The settings refl ect on the
Colour Temperature.
Drive: Subdue the following colours on the brighter
parts.
Cutoff: Subdue the following colours on the darker
parts.
Reset: Each item on “Colour Temp. Adjust” can be
restored to the original factory setting.
Red
Green
On
Blue
Colour Temp. Adjust* Cutoff
Red
Green
Blue
Off
Off: Remains as default setting.