Operation Manual

42
FEATURES (continued)
Channel List (DTT mode) (continued)
5. You can use the detailed setting by using setting section shown on the lower right.
Hide
Off
You can hide/show the channel which sets as “Skip On” by
pressing
OK
button whilst selecting “Hide”.
Off: Display all channel on the Channel List & EPG
regardless of “Skip On/Off”. The indicator located on the
left of the icon
will be black.
On: If set as “Skip On,” the channel is not displayed on
Channel List & EPG.The indicator located on the left of
the icon
will be green.
On
Single Scan
Search Digital channels manually.
Input the channel number by numeric key on the remote
control. Then, select [Scan] and press
OK
button to start
scanning.
If any new channel is found, it will be added to the Channel
List.
Full Scan
Search Digital channels automatically. (auto search)
Select [Continue] & press
OK
button to start scanning all
Digital channels.
If any new channel is found, it will be added to the Channel
List.
Scan Setting
(***T01E and
TP01E model
only)
In Standby
Off
If set On, this operates Full Scan whilst TV is in Standby/Off.
(The default setting is On.)
On
In Operate
Off
If set On, this operates Full Scan whilst TV is On. It
automatically starts scanning at set time. (The default setting
is Off.)
On
Time
Select a start time for Auto Scan. (The default time is 04:30.)
By using
◄►
button, select a position to input, and input a
desired time by using
button.
Interval
Daily
Select a preferred interval. (The default setting is Daily.)
Weekly
6. Press
button (several times if necessary) on the remote control to return to Normal screen.
• Press
button on the remote control to switch to TV Channel Manager screen.
• Press
OK
button to move to Channel Edit page. See
29
for the details.