Operation Manual

51
ENGLISH
FEATURES (continued)
Size Switching (continued)
Input Signal
Display
Screen
Display
Size
To display suitable screen as follows.
When Watching HD Pictures:
(16:9 Signal)
Full/Full 1 Play a 16:9 image faithfully showing 95% of the size.
Full 2
Play a 16:9 image faithfully showing 100% of the size.
* In some case, the screen display has unnecessary blanking or
noise at the edges.
NOTE
The screen saver function does not work at Full 2 mode.
Information
Aspect ratio represents horizontal: vertical ratio on screen.
Position Adjustment
Vertical picture position can be adjusted for Panoramic 1, Zoom, C14:9L, and 14:9 Zoom mode as follows.
1. Press
button on the remote control to select position adjustable size.
2. The information display will appear. It includes information of position if available.
3. Adjust the position by
button.
Adjustment range of each picture size are as shown below.
Panoramic 1: -12 to+12
Zoom: -31 to+ 31
C14:9L and 14:9 Zoom: -16 to+ 16
CAUTION
Using a wide-screen television
This television has a screen mode selection feature. If an incompatible screen mode is selected to play certain
software, such as a TV programme, the image would appear different from the original. Take this into
consideration when making screen mode choices.
Use of the wide feature displaying enlarged pictures in coffee shops, hotel and other establishments for
commercial or public viewing purposes could infringe on the copyright holder’s right protected by Copyright Law.
When a normal 4:3 image (not wide screen) is displayed over the entire screen in the Panoramic mode, the
peripheral image may disappear partly and/or appear distorted in some cases. Use 4:3 mode to view the image
refl ecting original intention.
PressŸ
Pressź
Zoom
+31
Panoramic 1
Zoom
-31
Panoramic 1