Operation Manual

FEATURES (continued)

Audio Switching

NICAM / Sound Multiplex (including A2) (TV mode)

You can make optimum use of available audio by pressing I/II button of remote control. Audio can be switched only

if receiving NICAM and sound multiplex signals; otherwise, pressing this button will have no effect, such as when

only mono sound is received.

These can be divided into two main categories: Bilingual/Dual Sound broadcast and Stereo broadcast.

Bilingual/Dual Sound broadcast

Bilingual broadcast is the broadcast available on the main and sub languages, whilst dual sound broadcast is

available on the primary and secondary sounds; for example, some sports programmes contain broadcast

commentary on a game as primary sound, and a commentary about a team as the secondary.

When bilingual programme is received, sound mode display appears in yellow as shown. Also, when receiving

NICAM signals, NICAM display will appear.

Each time I/II button is pressed, the display is switched in the sequence of following.

Sound multiplex signal received

NICAM signal received

Audio [ ]

Audio NICAM[ ] Audio NICAM[ ]

Audio

[ ]

Audio

[I]…Main language/Primary Sound

[II]...Sub language/Secondary Sound

ź…force mono: This selects main language or primary sound.

Stereo broadcast

With stereo broadcast, you can enjoy different sound from either side.

When a stereo programme is received, sound mode display will appear in red as shown.

Also, when receiving NICAM signals, NICAM display will appear.

Press I/II button to switch between stereo and mono sound.

Sound multiplex signal received

Audio NICAM

Audio

NICAM signal received

...Stereo

ź .... Force Mono

NOTE

• Please select ź(force mono) in case of poor reception, noise, poor stereo sound due to signal condition so that

you can receive a clear mono sound.

• V represents the Mono broadcast.

Yellow Yellow Green

Red Green