User's Manual

23
1.6 Manual configuration
There are 3 options for the manual
conguration.
If you select Congure Network Settings
Manually, proceed to item &RQ¿JXULQJWKH
network settings manually. (
25)
• Prole (
below)
• History (
24)
• Congure Network Settings Manually (
25)
• To check the setting in a prole data, follow the process below.
1) Choose a prole data that you want to check.
2) Move the mouse cursor to the prole data, and click the right button on the
mouse to display a pop-up menu.
3) Select the “Property” in the pop-up menu, and click the left button on the
mouse.
4) The setting information of the selected prole data is shown.
• If the DHCP is set on in the projector, the network connection between the
projector and computer may not be established since IP address may be varied.
If you like to use the Prole connection, set the DHCP off in the projector.
NOTE
Selecting a prole data connect the network
with the projector.
It is required to store the prole data in
advance. (
33)
1) Select the >3UR¿OH@.
2) Choose a prole data listed in the window.
3) Click the [Connect].
4) The network connection will be established.
Proceed to item &RQ¿UPLQJWKH
connection to your destination. (
30)
1.6.1 Profile connection
1. Connection to the network