Instruction Manual
Table Of Contents
- 1 Safety summary
- 2 Switch Names and Functions
- 3 Operation
- 4 Icon Description
- 5 Function Menu
- 5.1 Simple Timer Setting
- 5.2 Operation Schedule Setting
- 5.3 Power Savings Setting
- 5.4 Night Quiet Operation
- 5.5 Power Saving/Night Quiet Schedule Setting
- 5.6 Power Consumption Display
- 5.7 Autoboost (QUICK MODE) Setting
- 5.8 Comfort Setting
- 5.9 Motion sensor setting
- 5.10 Setback Setting
- 5.11 Elevating Grille
- 5.12 Filter Reminder Reset Setting
- 5.13 FrostWash
- 5.14 Individual Louver Setting
- 5.15 Cancel Individual Louver Setting
- 5.16 Louver Open/Close
- 5.17 Ventilation
- 5.18 Total Heat Exchanger Setting
- 6 Service & installation menu
- 6.1 Installation menu
- 6.1.1 Test Run
- 6.1.2 Function selection
- 6.1.3 Thermistor Selection
- 6.1.4 Input / Output Setting
- 6.1.5 Thermistor Calibration in Controller
- 6.1.6 Fan Speed at Cooling Thermo-OFF
- 6.1.7 Fan Speed at Heating Thermo-OFF
- 6.1.8 Indoor Unit Address Change
- 6.1.9 Address Check Operation
- 6.1.10 Address Initialization
- 6.1.11 Setting Initialization
- 6.1.12 Main Remote Setting
- 6.1.13 Priority Setting
- 6.1.14 Cancel Preheating Control
- 6.1.15 Elevating grille Setting
- 6.1.16 Power Up Setting
- 6.1.17 Setback Trigger Unit
- 6.1.18 Refrigerant Leak Sensor Setting
- 6.2 Service menu
- 6.3 Check Menu
- 6.1 Installation menu
- 7 Screen Display Setting menu
- 8 Contact Information menu
- 9 Hotel Mode Setting
- 10 In Alarm Condition
7.1.3 Run Indicator Brightness
1 Select “Run Indicator Brightness” on the “Screen Display
Setting” screen and press “OK”.
2 Press “ " or " " to change the brightness value. Select
“
OK
” and press “OK”, the screen returns to the “Screen
Display Setting” screen.
7.1.4 Display Adjustment
Function Action
Backlight Brightness Adjust the brightness of the backlight.
Backlight Dim
Change the time when the backlight turns dark
after inactivity.
Backlight OFF LCD screen OFF
Screen theme Change theme between Light or Dark
? NOTE
When connecting with two remote controllers, the maximum backlight
brightness is 8.
Backlight Brightness
1 Select “Display Adjustment” on the “Screen Display Setting”
screen and press “OK”.
2 Select “Brightness” and press “OK”.
3 Press “ " or " " to change the brightness value.
Select “
OK
” and press “OK”, the screen returns to Step2.
SCREEN DISPLAY SETTING MENU
PMML0601 rev.0 - 07/202294