Instruction Manual
Table Of Contents
- 1 Safety summary
- 2 Switch Names and Functions
- 3 Operation
- 4 Icon Description
- 5 Function Menu
- 5.1 Simple Timer Setting
- 5.2 Operation Schedule Setting
- 5.3 Power Savings Setting
- 5.4 Night Quiet Operation
- 5.5 Power Saving/Night Quiet Schedule Setting
- 5.6 Power Consumption Display
- 5.7 Autoboost (QUICK MODE) Setting
- 5.8 Comfort Setting
- 5.9 Motion sensor setting
- 5.10 Setback Setting
- 5.11 Elevating Grille
- 5.12 Filter Reminder Reset Setting
- 5.13 FrostWash
- 5.14 Individual Louver Setting
- 5.15 Cancel Individual Louver Setting
- 5.16 Louver Open/Close
- 5.17 Ventilation
- 5.18 Total Heat Exchanger Setting
- 6 Service & installation menu
- 6.1 Installation menu
- 6.1.1 Test Run
- 6.1.2 Function selection
- 6.1.3 Thermistor Selection
- 6.1.4 Input / Output Setting
- 6.1.5 Thermistor Calibration in Controller
- 6.1.6 Fan Speed at Cooling Thermo-OFF
- 6.1.7 Fan Speed at Heating Thermo-OFF
- 6.1.8 Indoor Unit Address Change
- 6.1.9 Address Check Operation
- 6.1.10 Address Initialization
- 6.1.11 Setting Initialization
- 6.1.12 Main Remote Setting
- 6.1.13 Priority Setting
- 6.1.14 Cancel Preheating Control
- 6.1.15 Elevating grille Setting
- 6.1.16 Power Up Setting
- 6.1.17 Setback Trigger Unit
- 6.1.18 Refrigerant Leak Sensor Setting
- 6.2 Service menu
- 6.3 Check Menu
- 6.1 Installation menu
- 7 Screen Display Setting menu
- 8 Contact Information menu
- 9 Hotel Mode Setting
- 10 In Alarm Condition
9 HOTEL MODE SETTING
When the advanced wired remote controller is set to hotel mode,
the home screen and menu are changed. For how to set the
hotel mode, refer to
“6.2.3 Hotel Mode Setting”.
• When the air conditioner is OFF
Press “
” or “ ” to select the setting item. The item changes
as follows: “Temperature” ↔ “Mode” ↔ “Fan Speed” ↔
“Language” ↔ “Off Timer” ↔ “Menu”.
Temperature
Mode
Fan Speed
Language
Off timer
Menu
• When the air conditioner is ON
Press “
” or “ ” to select the setting item. The item changes
as follows: “Temperature” ↔ “Mode” ↔ “Fan Speed” ↔
“Louver” ↔ “Language” ↔ “Off Timer” ↔ “Menu”.
Temperature
Mode
HOTEL MODE SETTING
PMML0601 rev.0 - 07/202298