Instruction Manual

No. Icon Description
23
Power savings
Power savings: Low
Power Savings: Med
Power savings: High
Either the outdoor capacity control, indoor rotation control, or intermittent operation control is set.
24 External saving
Outdoor capacity control is set on the central controller or outdoor unit.
It does not light when the indoor rotation control or intermittent operation control of the remote
controller is set.
25 Main
This is the main remote controller setting.
Use the main remote controller to set the main power savings setting.
In the case of a single unit, this information is not displayed.
26 Sub
Sub remote controller is set. Except for some power savings functions, the sub remote controller
cannot be set to save power.
27
!
Sub
There is no main remote controller.
Controls related to power savings and operation noise reduction may not operate normally.
28 Quick The operation is in quick mode.
29
Other remote are in Cool/Heat
setting
When the operation mode set from the remote controller and the operation mode of the outdoor unit
is different, the indicator blinks.
Indicator blinks when "cooling" is set from the remote controller and when the operation mode of the
outdoor unit is "heating".
30
Emergency Heating →
Alarm Code: **
Emergency Heating Control is in progress.
** indicates the alarm code.
31
Automatic cleaning unit
Mechanic error
Check the unit
Indicates an error related to the automatic lter cleaning unit.
32
Cleaning lter
The lter is being automatically cleaned.
33 Check Indicates an abnormality in the heat storage unit.
34 Preheating The compressor cannot be operated because it is preheating.
35 Hot start Preparing for heating operation.
36 Defrost
During the defrosting operation, the defrosting light turns on and the indoor fan stops.
When the operation is stopped during the defrosting operation, the operation light or the run indicator
goes out, but the operation continues and stops after the defrosting is completed.
37 Heat storage It cannot be operated due to the heat storage operation time.
38 Dust collection **-**
It is time to collect dust in the dust box of the automatic lter cleaning unit.
**-** indicates the unit to be collected.
39 Central control Displayed when using the central controller. Remote controller operation is restricted.
40 Time to OFF (hour) The remaining time of the off timer when the hotel mode is displayed.
41 Priority
Displayed on the main remote controller only in the operation mode or when there is a setting priority
for the operation mode and the set temperature.
At this time, the operation limit lights up on the sub remote controller, and the operation mode and
temperature setting change on the sub remote controller are restricted.
42 Restriction
Displayed on the sub remote controller only when the operation mode or the operation mode and set
temperature setting priority is given.
? NOTE
• (*1): It depends on the settings of the remote controller.
• (*2): The default setting is cooling: set temperature +2.5°C, heating: set temperature -2.5°C.
• If you want to change the correction value for this setback operation, please contact the distributor for more detailed information.
ICON DESCRIPTION
PMML0601 rev.0 - 07/20228