Operation Manual

– 26 –
RAR-3R5
ADJUSTING THE HORIZONTAL AIRFLOW DIRECTION
At time of
purchase
(Front)
Area airflow
(Left,
Front)
Area airflow
(Right,
Front)
Wide
airflow
Horizontal
airflow
swing
Horizontal
preferred angle
(To return to the
front angle, use
this “preferred
angle” function.)
Wide airflow ( )
• When (WIDE AIRFLOW) is displayed on the
remote controller, the horizontal air deflector is set to
the wide airflow angle.
• The fan speed is increased during the wide airflow
operation.
• Even if wide airflow has been set, the angle of horizontal air deflector may
change in the event the room temperature and humidity continue to be high
during Cooling, Dehumidifying or Dry Cool operation. The angle will change
back to wide airflow once the temperature and humidity have been lowered by
the air conditioning operation.
Adjust the horizontal airflow direction
• The angle of horizontal airflow direction is set to the front at the time of
purchase.
• Every time the button is pressed, the mode of the horizontal air deflector changes
as below.
• A short beep sounds and the angle of the horizontal air deflector changes.
About 100º