Operation Manual

– 24 –
POWERFUL OPERATION
CANCEL
• By pressing the (PREFERENCE) button during Auto, Heating, Dehumidifying, Cooling or Stainless Plasma
Air Purifying operation, the air conditioner performs the “Powerful” operation.
• The airflow will be extended so that the air can reach even further during powerful operation.
(Extended Airflow)
Press the (PREFERENCE) button during operation.
• A short beep sounds and the Preference (Powerful) operation starts.
(“POWERFUL” indicator lit on the remote controller.)
Press the (PREFERENCE) button again.
• “POWERFUL” indicator turns off on the remote controller.
Operation mode In this situation Operating mechanism
Heating
• When you want the room to be
a little warmer
• Set approximately 2°C higher than the preset
temperature. Powerful heating operation is
performed.
Dehumidifying
• When you want the room to be
less humid
• Powerful dehumidifying operation is performed
aiming to achieve humidity of approximately 40%.
Cooling
• When you want a little cooler
air
• When you want the room to be
a little cooler
Auto Dehumidifying
• When you want to remove
humidity a little faster
• Laundry drying efficiency is enhanced.
• Condensation-control efficiency is enhanced.
Dehumidifying
• Set approximately 3°C lower than the preset
temperature. Powerful cooling operation is
performed.
• High speed dehumidifying operation is performed
aiming to achieve humidity of approximately 40%.
Condensation
Control
Quick Laundry