Operation Manual

– 47 –
ENGLISH
DEUTSCHFRANÇAISITALIANOSPANISHPORTUGUÊS
∂ÏÏËÓÈο
РУССКИЙ
• Do the batteries need replacement?
• Is the polarity of the inserted batteries correct?
• Is the power plug inserted properly?
• Is the fuse blown out or circuit breaker tripped?
• Is there a blackout? (Operation remains idle after a blackout.)
• Is the micro mesh stainless filter blocked with dust?
• Is the set temperature suitable?
• Have the vertical air deflector been adjusted to the correct positions according to
the operation mode selected?
• Are the air inlets and air outlets of indoor and outdoor units blocked?
• Is the fan speed “LOW” or “SILENT”?
• Is the front panel closed properly?
• Is the front panel closed properly?
• Check “Filter Cleaning Operation”.
• Is the front panel closed properly?
PLEASE CHECK THE FOLLOWING BEFORE SERVICE
Signal cannot be
received
(Remote controller
display is dim or
blank)
Operation does
not start
Does not cool well
Does not heat well
Movable panel does
not move
(CLEAN)
indicator blinks
(CLEAN)
indicator blinks
after cooling,
dehumidifying and
Dry operations
FAILURE OF IONIZED MIST GENERATOR AND ELECTRIC DUST COLLECTOR
• If the (MIST/AIR PURIFYING) indicator on the indoor unit is continuously blinking, check the dirt on
the ionized mist generator and electric dust collector. Clean them if they are dirty. (Page 42)
If the (MIST/AIR PURIFYING) indicator still continues to blink, the ionized mist generator and/or electric
dust collector is out of order.
In this case, Ionized Mist operation and Stainless Plasma Air Purifying operations are unavailable,
however other functions of the air conditioner are available without being affected.
• Contact your sales agent if the Ionized Mist generator and electric dust collector malfunctions.