User Manual

9-6
REMOTE CONTROLLERS OPERATION
6. Press the Temperature button ( or ) to adjust the shift value.
NOTE:
1. There are total of 7 shift values ranging from -3 to 3.
2. The displayed shift value, and symbol on the remote controller display will be disappear after 10
seconds
3. The changed shift value will remain unchanged after turned off the power.
4. If “0” is displayed on the remote controller display, it indicates the shift value is now at the initial setting.
9.1.1.3 OPERATION LOCK
1. HEATING MODE
a) Press and hold (ECO) and (POWERFUL) buttons, press (RESET) button on the same time.
Release (RESET) button only when Screen 1 appear, then release (ECO) button and
(POWERFUL) button.
Screen 1
b) Wait until only Screen 2 appear.
Screen 2
c) The heating mode operation is locked.
d) To unlock HEATING mode, repeat step (a). After all operations mode symbols displayed for 10 seconds, the
operation mode symbol before cancellation will be display. The heating mode operation is unlocked.
2. COOLING AND DEHUMIDIFYING MODE
a) Press and hold (ECO) and (SILENT) buttons for at least 5 seconds when the remote controller is
OFF.
b) Wait until only and displayed on the screen. The cooling and dehumidifying modes operation is locked.
c) To unlock HEATING mode, repeat step (a). After all operations mode symbols displayed for 10 seconds, the
operation mode symbol before cancellation will be display. The cooling and dehumidifying mode operation is
unlocked.