User Manual

9-10
REMOTE CONTROLLERS OPERATION
BUTTONS
FUNCTION
MODE Selector
Use this button to select the operationg mode. Every time you press this button, the mode will
change for (HEATING), (DEHUMIDIFYING), (COOLING) cyclically.
FAN SPEED Selector Button
This determines the fan speed. Every time you press this button, the airflow rate will change
from (This button allows selection of
optimal or preferred fan speed for each operation mode).
STOP button
Press this button to stop operation.
ECO button
Use this button to set the ECO mode.
POWERFUL button
Use this button to set the POWERFUL mode.
TEMPERATURE button
Value will change quicker when keep pressing.
AUTO SWING (Vertical) button
Controls the angle of the horizontal air deflector.
AUTO SWING (Horizontal) button
Controls the angle of the vertical air deflector.
LEAVE HOME button
Prevent the room temperature from falling too much by setting temperature 10°C automatically
when no on is at home.
ECO SENSOR button
Press this button to enter eco sensor mode.
SLEEP TIMER button
Use this button to set the sleep timer.
ON TIMER button
Select the turn ON time.
OFF TIMER button
Select the turn OFF time.
ONE TOUCH CLEAN button
Drying indoor heat exchanger after cooling operation to prevent mildew.
FILTER CLEAN button
Start filter cleaning operation while the air conditioner .
AUTO button
Press this button to start automatic operation/
COMFORT AIRFLOW button
Press this button to start comfort airflow operation.
IONIZED MIST button
Press this button to start ionized mist operation.
ON/OFF TIMER button
The device will turn on (off) and off (on) at the designated time.
TIME button
Press the button to set starting time of the program
CANCEL
1) Press the button to cancel the current setting process on the screen.
2) Press the button by directing the remote controller towards the indoor unit, hen weekly
timer setting will be canceled from indoor unit after the beep sound from the indoor unit.
The program setting remains in the remote controller.
SEND button
Press the button for about 3 seconds by directing the remote controller towards the indoor unit
after finishing the program setting. Timer lamp on the indoor unit will blink rapidly and after the
beep soung from indoor unit, TIMER lamp will light up.
CLOCK button
Press the button to set calendar and clock.