StarBoard T-19WX Notices Reproduction or reprinting, without permission, of this manual or any part thereof is prohibited. The contents of this manual are subject to change without prior notice. Every effort has been made to ensure that this manual is complete and correct. However, should any questionable points, mistakes, etc., come to your attention, please inform the vendor. Please be advised in advance that this company will assume no responsibility for losses, etc.
StarBoard T-19WX Product Assurance Provisions This product is limited to use in the country where the user bought this product. For warranty details, refer to Appendix 3.6 at the end of this user’s guide. This First edition of the user’s guide (T19WX-EU090601) is for the following products: 70.53K02G00x (StarBoard T-19WX) , AH00219 * The term “x” as used in this manual denotes the model No. of the product. The StarBoard T-19WX incorporates WALTOP’s 19-inch LCD monitor integrated digitizer technology.
StarBoard T-19WX Safe Handling Safe Handling Markings and Symbols Various markings and symbols are used in this user’s guide and on this product, to ensure the safe and correct use of this product and to prevent personal injury and property damage. These symbols and their meanings are as explained below. Understand the information well before reading the body of the user’s guide. This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
StarBoard T-19WX Safe Handling Safety Precautions Always comply with them WARNING Securely insert the power plug into the power socket. Before moving this product, detach the power plug and the power cable. If it is not plugged in securely, overheating will occur, possibly resulting in electric shock or fire. The power cable might be damaged, possibly resulting in electric shock or fire. Do not plug in the power plug with a wet hand. When plugging in or unplugging the power plug, hold the plug.
StarBoard T-19WX Safe Handling Safety Precautions Always comply with them WARNING Do not use a power cable other than the accessory power cable. Do not open or alter the cabinet of this product. If a power cable other than the accessory power cable is used, fire or electric shock might result. The cabinet contains high-voltage areas, so electric shock or other injury will result. Unplug the power plug if you do not plan on using the product for an extended period of time.
StarBoard T-19WX Safe Handling Safety Precautions Always comply with them WARNING In the following cases, unplug the product from the AC Adaptor socket and ask the technical support of Hitachi Software. a. b. c. d. e. f. After the power cord or AC Adaptor plug is damaged. After liquid is spilled onto the main unit. After the main unit is exposed to rain or water. After this product malfunctions, even when operated according to the instruction manual.
StarBoard T-19WX Safe Handling Careful thought was given to the cautions on this device and in this user’s guide. However, unanticipated circumstances might occur. When operating this product, users themselves must exercise caution as well as follow instructions. WARNING Warning Details Page Use the AC Adaptor supplied with this product. Use only AC Adaptor or power cables specified by the manufacturer. Use of improper adaptors or cables can damage the product or cause a fire.
StarBoard T-19WX Contents 1. Introduction ................................................................................................. 1-1 1.1 Preparations before Use ...................................................................................... 1-1 1.1.1 Product Overview...................................................................................................... 1-1 1.1.2 Features .......................................................................................................
StarBoard T-19WX Introduction 1. Introduction 1.1 Preparations before Use This section covers preparations before using the StarBoard. Please read this section thoroughly if you are using the StarBoard for the first time. 1.1.1 Product Overview StarBoard T-19WX is a convenient and easy-to-use tablet-type interactive electronic board that lets you operate a PC with a stylus pen, and write text and images to a PC screen in real time as well as simultaneously input those to the PC.
StarBoard T-19WX Introduction 1.2 Parts Check After unpacking, make sure that all of the following parts are included. Parts No. Name Qty. (1) 19-inch Tablet monitor 1 (2) Stylus pen 1 (3) AAA alkaline dry cell 1 (4) Spare pen tips 2 (5) AC adapter 1 (6) Power cable (*1) (7) RGB cable (1.8m) 1 (8) USB cable (1.5m) 1 (9) Audio cable (stereo mini-plug) 1 (10) Pen tip replacement pin set 1 (11) StarBoard Software x.
StarBoard T-19WX Introduction 1.3 Part Names and Functions 1.3.1 Front Screen (1) (4) (5) (3) (2) (1) LCD and tablet operating area Receives text and graphical information entered with the stylus pen, and transmits the data to a PC. (4) Front switch panel These switches are used to turn the power ON/OFF, enter OSD menu settings, and adjust the volume. (2) Stand (bottom of body and back) The stand serves to hold the StarBoard in place. The LCD angle can be adjusted in the range of approx. 8° to 75°.
StarBoard T-19WX Introduction 1.3.2 Front Switch Panel (4) (5) (6) (1) (3) (2) (4) MENU/SELECT button This button is used to display the OSD menu. Press it after making menu selections to apply those. (1) Power button This button turns the StarBoard LCD monitor ON/OFF. (2) Power indicator This indicator turns green when power is supplied normally to the StarBoard and an image signal is detected. It turns red when no image signal is output from the PC, or when power saving mode is on.
StarBoard T-19WX Introduction 1.3.3 Connector Panel (5) (4) (1) (2) (3) (4) (5) StarBoard Bottom View (4) VGA input port This port is used to connect a PC via RGB cable to display images from the PC. (1) USB port A USB cable is connected here. (2) Power port The AC adapter is connected here. (3) VGA output port This port is used to connect external devices such as a projector via RGB cable to output video displayed on the StarBoard.
StarBoard T-19WX Introduction 1.3.4 Function Buttons (1) (2) (3) (4) (5) (6) (1) ToolBar hide/un-hide Hides/displays StarBoard Software ToolBar. (7) (8) (5) Topic list Hides/displays the Topic List. (6) Solid pen Switches to solid pen. (2) New blank page Adds a new blank page. (7) Fluorescent marker pen Switches to fluorescent marker pen. (3) Previous page Displays the page before the currently displayed page. (4) Next page Displays the page after the currently displayed page.
StarBoard T-19WX Introduction 1.4 Assembly and Setup Keep the following points in mind when installing the StarBoard. Select a stable, flat location. Avoid installing in locations that are dusty, extremely hot, cold, or humid. Also avoid installing in locations exposed to direct sunlight. 1.4.1 Adjusting the Stand CAUTION Hold the body firmly and slide the stand slowly when adjusting it.
StarBoard T-19WX Introduction (2) Slide the stand to the desired angle, and release the lever. Use the screen at an easily viewable angle, taking into account external light and ceiling lighting, which may reflect off the screen. 8° 75° (3) Check that the lever and stand are secure. 1.4.2 How to Use the Pen Holder The T-19WX comes with a pen holder on the back side. Store the stylus pen in the pen holder when not in use.
StarBoard T-19WX Introduction 1.4.3 Connection Procedure Before Connecting Equipment Install the StarBoard Software on your PC before connecting equipment. Equipment may not function normally if connections are made without first installing the software. WARNING Use the AC Adaptor supplied with this product. Use only AC Adaptor or power cables specified by the manufacturer. Use of improper adaptors or cables can damage the product or cause a fire.
StarBoard T-19WX Introduction (1) Connect the RGB cable to the VGA input port on the side of the StarBoard, and tighten the screws to fasten. Connect the other end of the cable to the PC VGA port, and tighten the screws to fasten. (2) Connect the USB cable to the USB port on the side of the StarBoard. Connect the other end of the cable to a USB port on the PC. (3) Connect the audio cable to the audio input port on the side of the StarBoard.
StarBoard T-19WX Usage 2. Usage Procedures This section describes the basic procedures for using StarBoard. For information on using advanced StarBoard features, see the StarBoard Software x.x. User's Guide, or StarBoard Software x.x Online Help. 2.1 Turning the StarBoard On This section describes how to turn the StarBoard on. (1) Turn on the StarBoard power. Push the power button (2) Turn on the PC and allow Windows to start. (3) The StarBoard Software starts automatically.
StarBoard T-19WX Usage 2.2 Using the Stylus Pen This section describes how to use the StarBoard stylus pen. 2.2.1 How to Use the Stylus Pen The stylus pen has a power switch. Battery life can be prolonged by switching the power switch OFF when not in use. To draw characters and figures using the stylus pen, set the power switch of the stylus pen to the ON position. ON/OFF switch Push the switch ON OFF 2.2.2 Basic Stylus Pen Operations The stylus pen can be used in the same way as a mouse.
StarBoard T-19WX Usage 2.2.3 Stylus Pen Settings The stylus pen has one pen tip button, and two side buttons. Mouse actions can be assigned to these three buttons. The default button settings are summarized in the following table. Button User action Corresponding mouse action Pen tip Press the pen tip against the display. Mouse left-click Side Button No. 0 Press the button with the pen tip slightly removed from the screen (5 mm or less). Mouse left double-click Side Button No. 1 Same as above.
StarBoard T-19WX Usage 2.2.4 Changing the Battery in the Stylus Pen The stylus pen contains a single AAA alkaline dry cell battery. If the pen begins to operate erratically (e.g., if pen input is cut off), change the battery as described below. Note that battery life is approximately 1,800 hours under normal usage. If the residual quantity of a battery decreases, the centre of a side button will light up red. If the centre of a side button lights up red, change the battery as described below.
StarBoard T-19WX Usage 2.2.5 Replacing the Stylus Pen Tip When the stylus pen tip wears down and becomes too short, replace it as described below. (1) Using the special pin set, remove the stylus pen tip. (2) Insert a new pen tip into the stylus pen.
StarBoard T-19WX Usage 2.3 Using the OSD Menu The OSD menu is used when adjusting the StarBoard LCD screen. OSD is an abbreviation for On-Screen Display. The OSD feature allows you to view and adjust the settings for the display on the screen. 2.3.1 OSD Buttons and Their Functions •MENU/SELECT button • (-) button This button is used to display the Brightness can be adjusted by the (+) OSD menu. Pressing it after and (-) buttons after pressing the (-) making menu selections applies button.
StarBoard T-19WX Usage 2.3.2 OSD Adjustment Options (1) BRIGHTNESS Used to adjust screen brightness. (0-100) (2) CONTRAST Used to adjust colour contrast. The larger the value, the brighter the image will be. (0-100) (3) LCD ADJUSTMENT CLOCK PHASE H.POSITION V.POSITION RETURN : Used to adjust screen size. (0-100) : Used to adjust the sampling timing (phase) for converting the analogue input signal to a digital input signal. (0-63) : Used to change the horizontal position of the screen.
StarBoard T-19WX Usage (4) COLOUR TEMPRATURE Used to adjust the colour temperature of the screen. (9300K, 6500K, USER, SRGB) USER : Used to adjust the red, green, and blue colours of the screen. (0-100) RETURN : Used to return to the previous page. (5) ECO MODE Used to turn the ECO mode ON, and limit brightness setting from 0 to 20 to reduce power consumption. RETURN : Used to return to the previous page. (6) LANGUAGE Used to select the display language.
StarBoard T-19WX Usage (7) OTHER SETUP SMOOTH : Used to adjust the smoothness of the image. (0-3) Use is not possible at a resolution of 1440 × 900 (WXGA+). OSD H.POSITION : Used to adjust horizontal position of OSD window. (0-100) OSD V.POSITION : Used to adjust vertical position of OSD window. (0-100) OSD TRANSPARENCY : Used to turn OSD window background transparency ON/OFF. OSD TIMEOUT VOLUME MODE MESSAGE : Used to set the amount of time before the OSD menu closes automatically.
StarBoard T-19WX Appendix 3. Appendix 3.1 Troubleshooting First, check adjustments and handling methods and check for poor cable connections. Those are often the causes of problems when nothing is actually broken. Screen display-related problems In this case PC screen does not display on StarBoard. Check this Is the PC power on? And do this To deal with problem see the PC manual and other documentation. Is the RGB cable connected Connect the RGB cable correctly.
StarBoard T-19WX Appendix Stylus pen-related problems In this case Check this And do this Stylus pen does not operate. StarBoard Software may be Uninstall StarBoard Software, and damaged or may not be then reinstall. (For details on how to installed correctly. install StarBoard software, see “StarBoard Software Installation ” in StarBoard Software x.x User’s Guide) Is battery worn out? Replace stylus pen battery. (For details on how to change the battery, see “2.2.
StarBoard T-19WX Appendix Function button-related problems In this case Function buttons don’t operate. Check this And do this Is the USB cable connected Connect USB cable to PC. (For details properly? on how to connect, see “1.4.3 Connection Procedure” on page 1-9 of this User’s Guide.) Is the StarBoard Software Function button features require the running? StarBoard Software. Use them with the StarBoard Software running. (For details on how to use the StarBoard Software, see the StarBoard Software x.
StarBoard T-19WX Appendix 3.2 System Specifications Item Product name Specification StarBoard T-19WX Model No. 70.53K02G00x* (StarBoard T-19WX), AH00219 Display Driver type Active-Matrix Liquid Crystal Display (TFT) characteristics Effective screen size 19 inches 408.24 mm (W)×255.15 mm (H) Resolution 1440×900 (WXGA+) Pixel pitch 0.2835×0.
StarBoard T-19WX Appendix Compatible Modes Standard Resolution Vertical Reflash (Hz) Horizontal Scan (KHz) Dos-Mode 720 × 400 70 31.5 VGA 640 × 480 60 31.5 640 × 480 72 37.9 640 × 480 75 37.5 800 × 600 60 37.9 800 × 600 72 48.1 800 × 600 75 46.9 1024 × 768 60 48.4 1024 × 768 70 56.5 1024 × 768 70 56.5 1280 × 1024 60 64.0 1280 × 1024 75 80.0 1440 x 900 60 55.9 1440 x 900 75 70.
StarBoard T-19WX Appendix 3.3 How to Take Care of the StarBoard Please clean your StarBoard periodically so it will continue to work for a long time. (1) Cleaning and care • Use a dry, soft cloth to clean the StarBoard display surface. Do not use detergents. • Use a diluted detergent without abrasives to clean the StarBoard cabinet area. Do not use undiluted detergent; rather, mix with water and soak a soft cloth in the mixture. Wring out cloth thoroughly before wiping.
StarBoard T-19WX Appendix 3.6 Provisions of Product Warranty 1. During the free warranty service period, if a malfunction occurs during normal use, the malfunction will be corrected without charge, according to the provisions of the warranty. Furthermore, if the customer registration card accompanying the warranty is not returned to our company, the customer information will not be registered, so free repairs might be unavailable.
StarBoard T-19WX Appendix (8) In the event of a malfunction in this product caused by the connection to this product of equipment other than the equipment specified by our company. (9) In the event that there is no abnormality in this product, but a defect in a part other than this product was detected or remedied. (10) In the event of ordinary wear and tear, wear, deterioration, etc., of consumables, even during normal use. 5. If this product malfunctions, review the contents of this user’s guide.
