Operation Manual

English
7
MEANINGS OF SYMBOLS
NOTE: Some units do not carry them.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
Chain saw, Portable
TCS33EB
Spark plug
It is important that you read, fully understand
before use, and observe the following safety
precautions and warnings. Careless or improper
use of the unit may cause serious or fatal injury.
Fuel tank capacity
Read, understand and follow all warnings and
instructions in this manual and on the unit.
Chain oil tank capacity
Always wear eye, head and ear protectors when
using this unit.
kg
Dry weight
(Without guide bar and chain)
Warning, kickback danger. Be careful of
possible sudden and accidental upward and/or
backward motion of the guide bar.
Guide bar length
One-handed usage not permitted. While
cutting, hold chain saw fi rmly with both hands
with thumb fi rmly locked around front handle.
÷ 2
Chain pitch
Chain brake Chain gauge
Choke
L
p
A
ISO22868
Sound pressure level LpA*
1
by ISO 22868
On/Start
L
A
w
ISO22868
Sound power level LwA*
2
Measured by ISO 22868
Off /Stop
L
A
w
2000/14/EC
Sound power level LwA*
2
Measured /Guaranteed by 2000/14/EC
Emergency stop
a
hv
Vibration level by ISO 22867
Front handle*
1
/ Rear handle*
1
Fuel and oil mixture
K
Uncertainty
Chain oil fi ll
P
Max. engine power by ISO 7293
Carburetor adjustment - Idle speed
MAX
Max. engine speed
Carburetor adjustment - Low speed mixture
MIN
Idle engine speed
Carburetor adjustment - High speed mixture Type of chain
Priming pump Max. chain speed
3
Guaranteed sound power level Number of teeth of drive sprocket
Engine size Type of guide bar
(Original instructions)
000Book_TCS33EB_WE.indb 7000Book_TCS33EB_WE.indb 7 2017/02/22 10:02:332017/02/22 10:02:33