- HITACHI VHS Instruction Manual VM-1800A VM-2800A VM-3800A

DIGITAL ZOOM

The digital zoom increases the magnification of the power zoom by 2 times. You must

place the subject you wish to magnify at the center of the viewfinder. Press and hold the

power zoom T control until you find the picture you want. You control the zoom with the

power zoom T and W controls. When "ZOOM" is not displayed in the viewfinder, normal

zoom functions resume.

NOTE: When the digital zoom is used, the more the image is magnified, the rougher the

picture becomes. Also even a slight shaking of the camcorder is conspicuous.

 X100 digital zoom (only for VM-3800A)

This feature allows the image to be magnified up to about 100 times. Press the "ZOOM

MODE" button to display "ZM:2", and then press and hold the power zoom T control

until you reach your desired magnification. Each time the "ZOOM MODE" button is

pressed, the display in the viewfinder will change as follows. You can use the X100

digital zoom feature when "ZM:2" is displayed.

After using the X100 digital zoom feature, press the "ZOOM MODE" button so that

"ZM:2" is no longer displayed in the viewfinder.