- HITACHI VHS Instruction Manual VM-1800A VM-2800A VM-3800A

TITLE RECORDING

3. Press "SHIFT" button repeatedly to move the flashing cursor to the place you want to

begin your title.

4. Select the first character for your title by pressing the "-" or "+" button repeatedly

until the desired character appears.

NOTE: Each title can contain up to two lines of 16 characters each. A chart showing the

characters contained in the titler is located on page 30.

5. After you have selected the first character, press "SHIFT" button to move the flashing

cursor to the place you want the next character.

6. Repeat steps 4 and 5 until you have completed the title.

NOTE: Character may flash, however it will be recorded correctly without flashing.

7. After completing your title, press "PAGE" button and create the title on another page.

8. After creating the title, press "TITLE" button to remove the title graphics from the

viewfinder. Now title graphics is stored in memory.

NOTE: As long as the correct current time can be displayed, the title is held in memory.

 Correcting errors during title storage

1. Press "Shift" button repeatedly until the character to be corrected will flash.

2. Press either "-" or "+" button until the correct character appears.

NOTE: The correct character may flash, however it will be recorded correctly without

flashing.