- HITACHI VHS Instruction Manual VM-1800A VM-2800A VM-3800A

TITLE RECORDING

 Recording titles on a tape in the camcorder

1. Slide "POWER" switch to "VIDEO".

2. Locate the position on the tape that you wish to record the title.

3. Set "POWER" switch to "CAM".

4. Press "TITLE" button to display the title graphics.

5. Press "PAGE" button until the title you wish to record appears in the viewfinder.

6. Press "REC/PAUSE" button to start the title recording.

7. Press "TITLE" button to remove the title graphics from the viewfinder. The

camcorder will now record as normal.

NOTE: If you are planning to video tape an event you must prepare your titles in advance,

then by pressing "TITLE" button superimpose the title over the scene as it's being

recorded. You cannot go back and record titles over existing video without erasing the

previously recorded material.

Recording titles on another VCR while playing a tape back with the

camcorder

1. Connect the camcorder and VCR. (See page 41.)

2. Select the title you wish to record from page 1 or page 2. The last title selected will

appear first. Press "TITLE" button to turn title off.

3. Set the VCR in the recording mode and camcorder in the playback mode.

4. Press "TITLE" button when you see the scene where you want to record the title.

5. Press "TITLE" button to erase the display from the viewfinder.

 Chart of characters available in the titler